high voltage triaxial icp® low mass, miniature,10 mv/g, 500 g, 0.25 in cube, adhesive mount, overcoated for 2000 volts,10 ft integral cable to a 4-pin ca connector

TRIAXIAL ACCELEROMETER

Model HV356A03

Add to Quote
  • CE
  • IP

HIGH VOLTAGE Triaxial ICP® low mass, miniature,10 mV/g, 500 g, 0.25 in cube, adhesive mount, overcoated for 2000 volts,10 ft integral cable to a 4-pin CA connector

  • Sensitivity: (±20%)10 mV/g (1.02 mV/(m/s²))
  • Measurement Range: ±500 g pk (±4905 m/s² pk)
  • Electrical Connector: Integral Cable

Additional configurations:

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Maximum.
[2] Typical.
[4] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±20 %) 10 mV/g 1.02 mV/(m/s²)
Measurement Range ±500 g pk ±4905 m/s² pk
Frequency Range (±5 %) (y or z axis) 2 to 6800 Hz 2 to 6800 Hz
Frequency Range (±5 %) (x axis) 2 to 4200 Hz 2 to 4200 Hz
Frequency Range (+1 dB) (x axis) ≥6800 kHz ≥6800 kHz
Resonant Frequency ≥45 kHz ≥45 kHz
Broadband Resolution (1) 0.003 g rms 0.03 m/s² rms [2]
Non-Linearity ≤1 % ≤1 % [1]
Transverse Sensitivity ≤6 % ≤6 %
Environmental
Overload Limit (Shock) ±5000 g pk ±49050 m/s² pk
Temperature Range (Operating) -65 to +250 °F -54 to +121 °C
Temperature Response See Graph %/°F See Graph %/°F [2]
Electrical
Excitation Voltage 22 to 30 VDC 22 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤200 Ohm ≤200 Ohm
Output Bias Voltage 9 to 16 VDC 9 to 16 VDC
Discharge Time Constant 0.24 to 1.0 sec 0.24 to 1.0 sec
Settling Time (within 10% of bias) <3 sec <3 sec
Spectral Noise (1 Hz) 1200 µg/√Hz 11772 (µm/sec2)/√Hz [2]
Spectral Noise (10 Hz) 300 µg/√Hz 2943 (µm/sec2)/√Hz [2]
Spectral Noise (100 Hz) 100 µg/√Hz 981 (µm/sec2)/√Hz [2]
Spectral Noise (1 kHz) 30 µg/√Hz 294 (µm/sec2)/√Hz [2]
Electrical Isolation 2000 VDC 2000 VDC [3]
Physical
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Polymer Polymer
Sealing Hermetic Hermetic
Size - Height 0.34 in 8.64 mm
Size - Length 0.34 in 8.64 mm
Size - Width 0.34 in 8.64 mm
Weight (without cable) 0.06 oz 1.7 gm [2]
Electrical Connector Integral Cable Integral Cable
Electrical Connection Position Side Side
Cable Termination 1/4-28 4-Pin Jack 1/4-28 4-Pin Jack
Cable Length 10 ft 3 m
Cable Type 4-conductor shielded, polyolefin jacket 4-conductor shielded, polyolefin jacket
Mounting Adhesive Adhesive

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories
Supplied
080A109 Petro Wax, one square, 1" x 1" x 0.25" 1
080A90 Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces) 1
ACS-1T Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable 1