rotary torque only transducer, w/auto-id, 200 nm (148 lbf-ft), 1/2-inch square drive, 10-pin pt receptacle, for impact tools

ROTARY TORQ, 200 NM, 1/2-IN SQ DR

Model 039050-51201

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock	Lead Times
More on the way	Lead Time for 1-1 is 0 Dys.

Rotary Torque Only Transducer, w/Auto-ID, 200 Nm (148 lbf-ft), 1/2-inch Square Drive, 10-pin PT Receptacle, for Impact Tools

For more information on RS Technologies Fastener products and applications, please visit:
https://www.pcb.com/sensors-for-test-measurement/fastener-technology
and click the link for Fastener Testing or Fastener Assembly

Measurement Range: 148 lbf-ft (200 Nm)
Sensitivity: 2.0 mV/V (2.0 mV/V)
Non-Linearity: <=0.25 % FS
Maximum Speed: 2500 RPM

Specification Notes

[1] FS - Full Scale.
[2] Matched for mV/V and shunt calibration.
[3] Matched to ±0.25% F.S.
[4] Over compensated temperature range.
[1] FS - Full Scale.
[5] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[6] Matched with 43.575 kOhm Precision Resistor.
[7] Per ANSI B107.4 Specifications
[8] See Outline Drawing 48350 for Complete Dimensions
[9] See PCB Declaration of Conformance PS119 for details.

	English:	SI:
Performance
Measurement Range (Full Scale Capacity)	148 lbf-ft	200 Nm
Sensitivity (output at rated capacity)	2.0 mV/V	2.0 mV/V	[3]
Non-Linearity	≤0.25 % FS	≤0.25 % FS	[1]
Hysteresis	≤0.25 % FS	≤0.25 % FS	[1]
Non-Repeatability	≤0.05 % FS	≤0.05 % FS	[1]
Interchangeabilty	≤0.30 % FS	≤0.30 % FS	[1] [2]
Environmental
Overload Limit	221 lbf-ft	300 Nm
Temperature Range (Operating)	0 to +200 °F	-18 to +93 °C
Temperature Range (Compensated)	+70 to +150 °F	+21 to +66 °C
Temperature Effect on Output (Maximum)	±0.002 %Reading/°F	±0.0018 %Reading/°C	[4]
Temperature Effect on Zero Balance (Maximum)	±0.002 %FS/°F	±0.0018 %FS/°C	[4]
Electrical
Bridge Resistance	350 Ohm	350 Ohm
Excitation Voltage	10 VDC	10 VDC	[5]
Insulation Resistance	≥5 GOhm	≥5 GOhm
Zero Balance	≤2 % FS	≤2 % FS	[1]
Shunt Calibration	≤0.25 % FS	≤0.25 % FS	[1] [6]
Auto ID	TTL Proprietary	TTL Proprietary
Physical
Size - Shaft Length	3.23 in	82.0 mm	[8]
Size - Housing Length	2.30 in	58.4 mm	[8]
Size - Housing Height	2.00 in	50.8 mm	[8]
Weight	.85 lb	386 gm
Mounting	1/2 inch Sq Drive	12.7 mm Sq Drive	[7]
Sensing Element	Strain Gage	Strain Gage
Housing Material	Aluminum	Aluminum
Shaft Material	Steel	Steel
Electrical Connector	PT02H-12-10P	PT02H-12-10P
Maximum Speed	2500 RPM	2500 RPM

* All specifications are at room temperature unless otherwise specified.

Accessories


Optional
080962-01000	Model 962 Portable Transient Data Recorder, complete with FastPlot2 data transfer software, 8GB USB Memory Drive, USB cable for data upload/download, battery charger, and carrying case	1
097000-34445	Cable Assembly, DB-15P to PT06A-12-10S, 2-ft coiled (9-ft straight), Connects Hand Torque-Angle Wrench, Hand Torque Only Wrench w/ LEDs or Rotary Torque/Torque-Angle Transducer w/ Auto-ID to RS Instrument (Model 922, 962, LabMaster)	1
4242R-000630		1
Supplied
7122R-04352A	Precision Cal Resistor 43.575K Ohm	1