Produtos

multi-purpose, icp® force sensor, 10 lb comp., 10 lb tension, 500 mv/lb, 0.05 sec. dtc

FORCE SENSOR

Model 208M178

Add to Quote
  • CE
  • IP

Multi-purpose, ICP® force sensor, 10 lb comp., 10 lb tension, 500 mV/lb, 0.05 sec. DTC

    Specification Notes

    [1] Typical.
    [2] Calculated from discharge time constant.
    [3] Estimated using rigid body dynamics calculations.
    [1] Typical.
    [4] Sensor contains protected electronics which may cause long 'turn-on" times.
    [1] Typical.
    [5] See PCB Declaration of Conformance PS023 for details.

    English: SI:
    Performance
    Sensitivity (±15 %) 500 mV/lb 112410 mV/kN
    Measurement Range (Compression) 10 lb 0.04448 kN
    Measurement Range (Tension) 10 lb 0.04448 kN
    Maximum Static Force (Compression) 60 lb 0.2669 kN
    Maximum Static Force (Tension) 60 lb 0.2669 kN
    Broadband Resolution (1) 0.0001 lb-rms 0.00045 N-rms [1]
    Low Frequency Response (-5 %) 10 Hz 10 Hz [2]
    Upper Frequency Limit 36000 Hz 36000 Hz [3]
    Environmental
    Temperature Range -65 to +250 °F -54 to +121 °C
    Temperature Coefficient of Sensitivity ≤0.05 %/°F ≤0.09 %/°C
    Electrical
    Discharge Time Constant ≤0.050 sec ≤0.050 sec
    Excitation Voltage 18 to 30 VDC 18 to 30 VDC
    Constant Current Excitation 2 to 20 mA 2 to 20 mA
    Output Impedance ≤100 Ohm ≤100 Ohm
    Output Bias Voltage 8 to 12 VDC 8 to 12 VDC [4]
    Spectral Noise (1 Hz) 0.0000126 lb/√Hz 0.0000562 N/√Hz [1]
    Spectral Noise (10 Hz) 0.0000042 lb/√Hz 0.0000189 N√Hz [1]
    Spectral Noise (100 Hz) 0.0000015 lb/√Hz 0.0000067 N/√Hz [1]
    Spectral Noise (1000 Hz) 0.0000005 lb/√Hz 0.0000023 N/√Hz [1]
    Physical
    Stiffness 6 lb/µin 1.05 kN/µm [1]
    Size - Hex 0.625 in 15.88 mm
    Size - Height 0.625 in 15.88 mm
    Weight 0.80 oz 22.7 gm
    Housing Material Stainless Steel Stainless Steel
    Sealing Hermetic Hermetic
    Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
    Electrical Connection Position Side Side
    Mounting Thread 10-32 Female No Metric Equivalent

    * All specifications are at room temperature unless otherwise specified.

    Accessories
    Supplied
    080A81 Thread lock adhesive (for Series 200) 1
    084A03 Impact cap, convex (for Series 208) 1
    081B05 Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder 2

    Optional Versions

    Build Out Your Measurement Chain

    208C01
    Model: 208C01

    Platinum Stock Products; Multi-purpose, ...

    $525.00 USD

    (Pricing valid only in the U.S.)

    Add to Cart