triaxial, lightweight miniature, ceramic shear icp® accel., 1.0 mv/g, 0.25 cube, 5 ft. integral cable to 4-pin jack +325f (163c) operating temp, non-filtered.

MINI TRIAXIAL ACCELEROMETER

Model 356A04

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock	Lead Times
More on the way	Lead Time for 1-5 is 8 Wks. Lead Time for 6-10 is 10 Wks. Lead Time for 11-20 is 12 Wks.
	Lead Time for 11-20 is 12 Wks.

Triaxial, lightweight miniature, ceramic shear ICP® accel., 1.0 mV/g, 0.25" cube, 5 ft. integral cable to 4-pin jack +325F (163C) operating temp, non-filtered.

Sensitivity: (±20%)1 mV/g (0.10 mV/(m/s²))
Measurement Range: ±5000 g pk (±49050 m/s² pk)
Frequency Range: (+/-10%)1 to 10000 Hz (1 to 10000 Hz)
Electrical Connector: Integral Cable

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Sensitivity (±20 %)	1 mV/g	0.10 mV/(m/s²)
Measurement Range	±5000 g pk	±49050 m/s² pk
Frequency Range (+/-5 %)	1.2 to 6000 Hz	1.2 to 6000 Hz
Frequency Range (+/-10 %)	1 to 10000 Hz	1 to 10000 Hz
Resonant Frequency	≥50 kHz	≥50 kHz
Broadband Resolution (1)	0.02 g rms	0.2 m/s² rms	[2]
Non-Linearity	1 %	1 %	[1]
Transverse Sensitivity	≤5 %	≤5 %
Environmental
Overload Limit (Shock)	±10000 g pk	±98100 m/s² pk
Temperature Range (Operating)	-65 to +325 °F	-54 to +163 °C
Temperature Response	See Graph %/°F	See Graph %/°F	[2]
Base Strain Sensitivity	0.05 g/µε	0.5 (m/s²)/µε	[2]
Electrical
Excitation Voltage	20 to 30 VDC	20 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤100 Ohm	≤100 Ohm
Output Bias Voltage	8 to 14 VDC	8 to 14 VDC
Discharge Time Constant	0.4 to 1.2 sec	0.4 to 1.2 sec
Settling Time (within 10% of bias)	<3 sec	<3 sec
Spectral Noise (1 Hz)	4.7 mg/√Hz	46 mm/s²/√Hz	[2]
Spectral Noise (10 Hz)	1.2 mg/√Hz	11.8 mm/s²/√Hz	[2]
Spectral Noise (100 Hz)	0.48 mg/√Hz	4.71 mm/s²/√Hz	[2]
Spectral Noise (1 kHz)	0.17 mg/√Hz	1.67 mm/s²/√Hz	[2]
Spectral Noise (10 kHz)	0.13 mg/√Hz	1.28 mm/s²/√Hz	[2]
Physical
Sensing Element	Ceramic	Ceramic
Sensing Geometry	Shear	Shear
Housing Material	Titanium	Titanium
Sealing	Hermetic	Hermetic
Size - Height	0.25 in	6.35 mm
Size - Length	0.25 in	6.35 mm
Size - Width	0.25 in	6.35 mm
Weight (without cable)	0.03 oz	0.8 gm	[2]
Electrical Connector	Integral Cable	Integral Cable
Electrical Connection Position	Side	Side
Cable Termination	1/4-28 4-Pin Jack	1/4-28 4-Pin Jack
Cable Length	5 ft	1.5 m
Cable Type	019 4-cond Shielded	019 4-cond Shielded
Mounting	Adhesive	Adhesive

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
034G05	4-conductor, low noise, shielded FEP cable, 5-ft, 4-socket plug to (3) BNC plugs (labeled X Y Z)	1
080A109	Petro Wax, one square, 1" x 1" x 0.25"	1
080A90	Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces)	1
ACS-1T	Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable	1