Productos

FORCE SENSOR

Model 208C05

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock	Lead Times
More on the way	Lead Time for 1-10 is 14 Dys. Lead Time for 11-20 is 4 Wks.

Platinum Stock Products; Multi-purpose, ICP® force sensor, 5k lb comp., 500 lb tension, 1 mV/lb

Measurement Range: 5000 lb (22.24 kN)
Sensitivity: (±15%)1 mV/lb (224.82 mV/kN)
Low Frequency Response: (-5%)0.0003 Hz
Upper Frequency Limit: 36000 Hz
Temperature Range: -65 to +250 °F (-54 to +121 °C)
Mounting Thread: 10-32 Female

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[2] Typical.
[5] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Sensitivity (±15 %)	1 mV/lb	224.82 mV/kN
Measurement Range (Compression)	5000 lb	22.24 kN
Measurement Range (Tension)	500 lb	2.224 kN
Maximum Static Force (Compression)	8000 lb	35.59 kN
Maximum Static Force (Tension)	500 lb	2.224 kN
Broadband Resolution (1)	0.05 lb-rms	0.222 N-rms	[2]
Low Frequency Response (-5 %)	0.0003 Hz	0.0003 Hz	[3]
Upper Frequency Limit	36000 Hz	36000 Hz	[4]
Non-Linearity	≤1 % FS	≤1 % FS	[1]
Environmental
Temperature Range	-65 to +250 °F	-54 to +121 °C
Temperature Coefficient of Sensitivity	≤0.05 %/°F	≤0.09 %/°C
Electrical
Discharge Time Constant (at room temp)	≥2000 sec	≥2000 sec
Excitation Voltage	20 to 30 VDC	20 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤100 Ohm	≤100 Ohm
Output Bias Voltage	8 to 14 VDC	8 to 14 VDC
Spectral Noise (1 Hz)	0.00168 lb/√Hz	0.00750 N/√Hz	[2]
Spectral Noise (10 Hz)	0.00112 lb/√Hz	0.00501 N√Hz	[2]
Spectral Noise (100 Hz)	0.000459 lb/√Hz	0.00205 N/√Hz	[2]
Spectral Noise (1000 Hz)	0.000133 lb/√Hz	0.000592 N/√Hz	[2]
Output Polarity (Compression)	Positive	Positive
Physical
Stiffness	6 lb/µin	1.05 kN/µm	[2]
Size - Hex	0.625 in	15.88 mm
Size - Height	0.625 in	15.88 mm
Size - Sensing Surface	0.500 in	12.7 mm
Weight	0.80 oz	22.7 gm
Housing Material	Stainless Steel	Stainless Steel
Sealing	Hermetic	Hermetic
Electrical Connector	10-32 Coaxial Jack	10-32 Coaxial Jack
Electrical Connection Position	Side	Side
Mounting Thread	10-32 Female	10-32 Female

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
080A81	Thread lock adhesive (for Series 200)	1
084A03	Impact cap, convex (for Series 208)	1
081B05	Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder	2
M081A62	Mounting stud, 10-32 to M6x1x 8.3 mm long, BeCu	2