Produtos

low cost embeddable accelerometer, 3-wire low power, 10 mv/g, low profile to5 housing, positive output, header pins

OST ACCELEROMETER

Model 66103PPZ1

Add to Quote
  • CE
  • IP

Low cost embeddable accelerometer, 3-wire low power, 10 mV/g, low profile TO5 housing, positive output, header pins

  • Sensitivity: (±20%)10 mV/g (1.02 mV/(m/s²))
  • Frequency Range: (±3dB)0.5 to 10k Hz (0.5 to 10k Hz)
  • Sensing Element: Ceramic
  • Measurement Range: 200 g (2000 m/s²)
  • Weight: 0.08 oz (2.2 gm)

Specification Notes

[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] The high frequency tolerance is accurate within ±10% of the specified frequency.
[4] Typical.
[5] Measurement range achieved is dependent upon excitation voltage.
[6] Positive output along Z-axis (in upward direction when pin mounted).
[7] Performance depends on mounting
[4] Typical.
[8] See PCB Declaration of Conformance PS198

English: SI:
Performance
Sensitivity (±20 %) 10 mV/g 1.02 mV/(m/s²) [1] [6]
Measurement Range 200 g 2000 m/s² [5]
Frequency Range (±3 dB) 0.5 to 10k Hz 0.5 to 10k Hz [3] [7]
Resonant Frequency >25 kHz >25 kHz [7]
Broadband Resolution 0.0049 g rms 0.048069 m/s² rms [4]
Non-Linearity ≤1 % ≤1 % [2]
Transverse Sensitivity ≤7 % ≤7 %
Environmental
Overload Limit (Shock) 5000 g pk 49k m/s² pk
Temperature Range (Operating) -65 to +185 °F -54 to +85 °C
Temperature Response See Graph See Graph [4]
Electrical
Settling Time (within 1% of bias) <3 sec <3 sec [4]
Discharge Time Constant ≥0.3 sec ≥0.3 sec
Excitation Voltage 3 to 12 VDC 3 to 12 VDC
Output Impedance <100 Ohm <100 Ohm
Current Draw 0.75 mA 0.75 mA [4]
Output Bias Voltage (±10 %) 0.5 x Excitation Voltage 0.5 x Excitation Voltage
Spectral Noise (10 Hz) 103 µg/√Hz 1010 (µm/sec2)/√Hz [4]
Spectral Noise (100 Hz) 56 µg/√Hz 549 (µm/sec2)/√Hz [4]
Spectral Noise (1 kHz) 46 µg/√Hz 451 (µm/sec2)/√Hz [4]
Physical
Size - Lip Diameter 0.36 in 9.1 mm
Size - Height 0.26 in 6.6 mm
Weight 0.08 oz 2.2 gm
Mounting Adhesive/Solder Adhesive/Solder
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Stainless Steel Stainless Steel
Sealing Welded Hermetic Welded Hermetic
Electrical Connector Header Pins Header Pins
Electrical Connection Position Bottom Bottom
Electrical Connections (Pin 1) Acceleration Output Acceleration Output
Electrical Connections (Pin 2) Neg (-) Ground Neg (-) Ground
Electrical Connections (Pin 3) Pos (+) VDC Pos (+) VDC

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories
Supplied
ICS-2 Calibration of industrial accel., single-point, 100 Hz reference sensitivity 1

Optional Versions

(HT) High temperature, extends normal operation temperatures

English SI
Temperature Range -65 to 250 -54 to 121