Produtos

quartz, free-field, icp® blast pressure pencil probe, 500 psi, 10 mv/psi, 4-pin connector, with two outputs for t.o.a

ICP BLAST PRESSURE SENSOR

Model 137B27

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
More on the way Lead Time for 1-5 is 12 Wks.
Lead Time for 6-10 is 14 Wks.
  • CE
  • IP

Quartz, free-field, ICP® blast pressure pencil probe, 500 psi, 10 mV/psi, 4-pin connector, with two outputs for T.O.A

  • Measurement Range: 500 psi (3447 kPa)
  • Sensitivity: (±15%)10 mV/psi (1.45 mV/kPa)
  • Resonant Frequency: >=400 kHz
  • Electrical Connector: 4-Pin
  • Weight: 16.1 oz (456 gm)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] For +10 volt output, minimum 26 VDC supply voltage required. Negative 10 volt output may be limited by output bias.
[4] Two identically spec'd elements spaced 10cm apart - see drawing #65310 for details. Individual calibration certs supplied for each channel.
[2] Typical.
[5] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Measurement Range (for ±5V output) 500 psi 3447 kPa
Useful Overrange (for ± 10V output) 1000 psi 6895 kPa [3]
Sensitivity (±15 %) 10 mV/psi 1.45 mV/kPa [4]
Maximum Pressure 5 kpsi 34474 kPa
Resolution 1 mpsi 0.007 kPa [2]
Resonant Frequency ≥400 kHz ≥400 kHz
Rise Time (Incident) ≤6.5 µ sec ≤6.5 µ sec
Non-Linearity ≤1.0 % FS ≤1.0 % FS [1]
Environmental
Temperature Range (Operating) -100 to +275 °F -73 to +135 °C
Temperature Coefficient of Sensitivity ≤0.05 %/°F ≤0.090 %/°C
Electrical
Discharge Time Constant (at room temp) ≥0.2 sec ≥0.2 sec
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤100 Ohm ≤100 Ohm
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
Physical
Sensing Geometry Compression Compression
Sensing Element Quartz Quartz
Housing Material Aluminum Aluminum
Diaphragm Invar Invar
Sealing Epoxy Epoxy
Electrical Connector 4-Pin 4-Pin
Weight 16.1 oz 456 gm [2]

* All specifications are at room temperature unless otherwise specified.

Accessories
Supplied
PCS-6AA 0

Build Out Your Measurement Chain

QM
Model: QM

Double splice to two BNC plugs, labeled ...

Add to cart for a quote.

Add to Quote
079A15
Model: 079A15

Microphone stand (with boom attachment &...

$85.00 USD

(Pricing valid only in the U.S.)

Add to Cart
079A17
Model: 079A17

Tripod microphone stand

$75.00 USD

(Pricing valid only in the U.S.)

Add to Cart
079A18
Model: 079A18

Flexible arm with 2" clamp at base and 1...

$152.00 USD

(Pricing valid only in the U.S.)

Add to Cart
AY
Model: AY

4-socket 1/4-28 plug (for use with DC & ...

$77.00 USD

(Pricing valid only in the U.S.)

Add to Cart
063A02
Model: 063A02

Mounting adaptor for 137 Series Free-fie...

$350.00 USD

(Pricing valid only in the U.S.)

Add to Cart