Produtos

pressure sensor icp® pressure sensor, 100 psi, 50 mv/psi, 3/8-24 mtg thd, accel. comp., ground isolated

PRESSURE SENSOR

Model 102M205

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
More on the way Call for Lead Time
  • CE
  • IP

Pressure Sensor ICP® pressure sensor, 100 psi, 50 mV/psi, 3/8-24 mtg thd, accel. comp., ground isolated

  • Measurement Range: 100 psi (689.5 kPa)
  • Sensitivity: (±10mV/psi)50 mV/psi (7.25 mV/kPa)
  • Low Frequency Response: (-5%)0.50 Hz
  • Resonant Frequency: >=250 kHz
  • Electrical Connector: 10-32 Coaxial Jack
  • Weight: 0.4 oz (11 gm)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] For +10 volt output, minimum 24 VDC supply voltage required. Negative 10 volt output may be limited by output bias.
[2] Typical.
[4] Diaphragm with ablative coating.
[5] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Measurement Range (for ±5V output) 100 psi 689.5 kPa
Useful Overrange (for ± 10V output) 200 psi 1379 kPa [3]
Sensitivity (±10 mV/psi) 50 mV/psi 7.25 mV/kPa
Maximum Pressure 500 psi 3 448 kPa
Resolution 0.4 psi 0.0028 kPa [2]
Resonant Frequency ≥250 kHz ≥250 kHz
Rise Time ≤2 µ sec ≤2 µ sec
Low Frequency Response (-5 %) 0.50 Hz 0.50 Hz
Non-Linearity ≤1 % FS ≤1 % FS [1]
Environmental
Acceleration Sensitivity 0.002 psi/g 0 0014 kPa/(m/s²) [2]
Temperature Range (Operating) -100 to +275 °F -73 to +135 °C
Temperature Coefficient of Sensitivity ≤0.03 %/°F ≤.054 %/°C
Maximum Flash Temperature 3000 °F 1 649 °C
Maximum Vibration 2000 g pk 19600 m/s² pk
Maximum Shock 20000 g pk 196000 m/s² pk
Electrical
Output Polarity (Positive Pressure) Positive Positive
Discharge Time Constant (at room temp) ≥1 sec ≥1 sec
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
Physical
Sensing Element Quartz Quartz
Housing Material 17-4 Stainless Steel 17-4 Stainless Steel
Diaphragm 316L Stainless Steel 316L Stainless Steel [4]
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Weight 0.4 oz 11 gm

* All specifications are at room temperature unless otherwise specified.

Accessories
Supplied
PCS-1AZ 0
065A44 Seal ring, 0.435" OD x 0.377" ID x 0.030" thk, Cu (for Model 102A10) 3

Optional Versions

(M) Metric Mount
Accessories:
Supplied 065A40 Seal ring 0.435" OD x 0.397" ID x 0.030" thk brass 3