Produtos

rotary torque only transducer, small housing, 4-pin receptacle, 100 lbf-in, 1/4 in square drive, for impact tools

ROTARY TORQ, 100 LB-IN 1/4-IN SQ DR

Model 012025-20101

Add to Quote
  • IP

Rotary Torque Only Transducer, Small Housing, 4-Pin Receptacle, 100 lbf-in, 1/4 in Square Drive, for Impact Tools

  • Measurement Range: 100 lbf-in (11.3 Nm)
  • Sensitivity: 2.0 mV/V (2.0 mV/V)
  • Non-Linearity: <=0.25 % FS
  • Maximum Speed: 5000 RPM

Specification Notes

[1] FS - Full Scale.
[2] Matched for mV/V and shunt calibration.
[3] Matched to ±0.25% F.S.
[4] Over compensated temperature range.
[1] FS - Full Scale.
[5] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[6] Matched with 43.575 kOhm Precision Resistor.
[7] See Outline Drawing 65559 for Complete Dimensions

English: SI:
Performance
Measurement Range (Full Scale Capacity) 100 lbf-in 11.3 Nm
Sensitivity (output at rated capacity) 2.0 mV/V 2.0 mV/V [3]
Non-Linearity ≤0.25 % FS ≤0.25 % FS [1]
Hysteresis ≤0.25 % FS ≤0.25 % FS [1]
Non-Repeatability ≤0.05 % FS ≤0.05 % FS [1]
Interchangeabilty ≤0.30 % FS ≤0.30 % FS [1] [2]
Environmental
Overload Limit 150 lbf-in 16.9 Nm
Temperature Range (Operating) 0 to +200 °F -18 to +93 °C
Temperature Range (Compensated) +70 to +150 °F +21 to +66 °C
Temperature Effect on Output (Maximum) ±0.002 %Reading/°F ±0.0018 %Reading/°C [4]
Temperature Effect on Zero Balance (Maximum) ±0.002 %FS/°F ±0.0018 %FS/°C [4]
Electrical
Bridge Resistance 350 Ohm 350 Ohm
Excitation Voltage 10 VDC 10 VDC [5]
Insulation Resistance ≥5 GOhm ≥5 GOhm
Zero Balance ≤2 % FS ≤2 % FS [1]
Shunt Calibration ≤0.25 % FS ≤0.25 % FS [1] [6]
Physical
Size - Shaft Length 2.37 in 60.2 mm [7]
Size - Housing Length 1.69 in 42.9 mm
Size - Housing Height 1.30 in 33.0 mm
Weight .75 lb 340 gm
Mounting 1/4 inch Sq Drive 6.35 mm Sq Drive
Sensing Element Strain Gage Strain Gage
Housing Material Aluminum Aluminum
Shaft Material Steel Steel
Electrical Connector PT02H-8-4P PT02H-8-4P
Maximum Speed 5000 RPM 5000 RPM

* All specifications are at room temperature unless otherwise specified.

Accessories
Optional
080920-01000 Model 920 Portable Digital Peak Meter for torque, torque-angle or load measurement; Click-Wrench calc feature, w/battery charger, instruction manual & shoulder strap 1
080962-01000 Model 962 Portable Transient Data Recorder, complete with FastPlot2 data transfer software, 8GB USB Memory Drive, USB cable for data upload/download, battery charger, and carrying case 1
097000-34149 Cable Assembly, DB-15P to PT06A-8-4S, 2-ft coiled (9-ft straight), Connects Non-Auto-ID Hand Torque Only Wrench, Non-Auto-ID Rotary Torque Transducer or Stationary Torque Transducer to RS Instrument (Model 922, 962) 1
4242R-000600 1
Supplied
7122R-04352A Precision Cal Resistor 43.575K Ohm 1