Productos

low freq., industrial, ceramic shear icp® accel, 1000 mv/g, 0.2 to 6k hz, top exit, 2-pin conn., frequency sweep iso 17025 accredited calibration

ACCELEROMETER

Model 626B03

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
More on the way Call for Lead Time
  • CE
  • IP

Low freq., industrial, ceramic shear ICP® accel, 1000 mV/g, 0.2 to 6k Hz, top exit, 2-pin conn., frequency sweep ISO 17025 accredited calibration

  • Sensitivity: (±5%)1000 mV/g (102 mV/(m/s²))
  • Frequency Range: (±3dB)12 to 360000 cpm (0.2 to 6000 Hz)
  • Sensing Element: Ceramic
  • Measurement Range: ±5 g (±49.1 m/s²)
  • Weight: 7.0 oz (199 gm)

Specification Notes

[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] The high frequency tolerance is accurate within ±10% of the specified frequency.
[4] Typical.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±5 %) 1000 mV/g 102 mV/(m/s²) [1]
Measurement Range ±5 g ±49.1 m/s²
Frequency Range (±5 %) 30 to 120000 cpm 0.5 to 2000 Hz [3]
Frequency Range (±10 %) 22 to 240000 cpm 0.37 to 4000 Hz
Frequency Range (±3 dB) 12 to 360000 cpm 0.2 to 6000 Hz
Resonant Frequency 720 kcpm 12 kHz [4]
Broadband Resolution (1) 11 µg 107.9 µm/sec2 [4]
Non-Linearity ±1 % ±1 % [2]
Transverse Sensitivity ≤7 % ≤7 %
Environmental
Overload Limit (Shock) 2500 g pk 24525 m/s² pk
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Response See Graph %/°F See Graph %/°F [4]
Enclosure Rating IP68 IP68
Electrical
Settling Time (within 1% of bias) ≤5.0 sec ≤5.0 sec
Discharge Time Constant ≥1.0 sec ≥1.0 sec
Excitation Voltage 18 to 28 VDC 18 to 28 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance <100 Ohm <100 Ohm
Output Bias Voltage 8 to 12 VDC 8 to 12 VDC
Spectral Noise (10 Hz) 1.5 µg/√Hz 14.7 (µm/sec2)/√Hz [4]
Spectral Noise (100 Hz) 0.5 µg/√Hz 4.91 (µm/sec2)/√Hz [4]
Spectral Noise (1 kHz) 0.2 µg/√Hz 1.96 (µm/sec2)/√Hz [4]
Electrical Protection RFI/ESD RFI/ESD
Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm
Physical
Size - Hex 1 3/16 in 30.2 mm
Size - Height 2 3/16 in 55.6 mm
Weight 7.0 oz 199 gm
Mounting Thread 1/4-28 Female 1/4-28 Female [5]
Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Stainless Steel Stainless Steel
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015
Electrical Connection Position Top Top

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories
Supplied
ICS-1 Calibration of industrial accel. with full frequency response plot and NIST-traceable certificate 1
081A40 Mounting stud, 1/4-28 x 0.438" long stainless steel screw with hex socket and brass tip 1
085A31 Protective insulated boot 1

Optional Versions

(LB) Low Bias Voltage

English SI
Output Bias Voltage 6 to 8
Measurement Range ±3.5 ±34
Excitation Voltage 12 to 28
(M) Metric Mount
Accessories:
Supplied M081A61 Mounting Stud 1

(TO) Temperature Output

English SI
Temperature Scale Factor 5.56 mV/°F + 32 +10 mV/°C
Electrical Connections Ground
Electrical Connections Ground
Temperature Output Range +36 to +250 +2 to +121
Electrical Connections Acceleration Output
Electrical Connections Temperature Output