Productos

low freq., industrial, ceramic shear icp® accel, 500 mv/g, 0.2 to 6k hz, top exit, 2-pin conn., frequency sweep iso 17025 accredited calibration

ACCELEROMETER

Model 626B02

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock	Lead Times
More on the way	Call for Lead Time

Low freq., industrial, ceramic shear ICP® accel, 500 mV/g, 0.2 to 6k Hz, top exit, 2-pin conn., frequency sweep ISO 17025 accredited calibration

Sensitivity: (±5%)500 mV/g (51 mV/(m/s²))
Frequency Range: (±3dB)12 to 360000 cpm (0.2 to 6000 Hz)
Sensing Element: Ceramic
Measurement Range: ±10 g (±98 m/s²)
Weight: 7.0 oz (199 gm)

Specification Notes

[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] The high frequency tolerance is accurate within ±10% of the specified frequency.
[4] Typical.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Sensitivity (±5 %)	500 mV/g	51 mV/(m/s²)	[1]
Measurement Range	±10 g	±98 m/s²
Frequency Range (±5 %)	30 to 120000 cpm	0.5 to 2000 Hz	[3]
Frequency Range (±10 %)	22 to 240000 cpm	0.37 to 4000 Hz
Frequency Range (±3 dB)	12 to 360000 cpm	0.2 to 6000 Hz
Resonant Frequency	720 kcpm	12 kHz	[4]
Broadband Resolution (1)	20 µg	196 µm/sec²	[4]
Non-Linearity	±1 %	±1 %	[2]
Transverse Sensitivity	≤7 %	≤7 %
Environmental
Overload Limit (Shock)	2500 g pk	24525 m/s² pk
Temperature Range	-65 to +250 °F	-54 to +121 °C
Temperature Response	See Graph %/°F	See Graph %/°F	[4]
Enclosure Rating	IP68	IP68
Electrical
Settling Time (within 1% of bias)	≤3.0 sec	≤3.0 sec
Discharge Time Constant	≥1.0 sec	≥1.0 sec
Excitation Voltage	18 to 28 VDC	18 to 28 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	<100 Ohm	<100 Ohm
Output Bias Voltage	8 to 12 VDC	8 to 12 VDC
Spectral Noise (10 Hz)	0.9 µg/√Hz	8.8 (µm/sec²)/√Hz	[4]
Spectral Noise (100 Hz)	0.7 µg/√Hz	7.0 (µm/sec²)/√Hz	[4]
Spectral Noise (1 kHz)	0.3 µg/√Hz	3.1 (µm/sec²)/√Hz	[4]
Electrical Isolation (Case)	>100000000 Ohm	>100000000 Ohm
Physical
Size - Hex	1 3/16 in	30.2 mm
Size - Height	2 3/16 in	55.6 mm
Weight	7.0 oz	199 gm
Mounting Thread	1/4-28 UNF	Not Applicable	[5]
Mounting Torque	2 to 5 ft-lb	2.7 to 6.8 Nm
Sensing Element	Ceramic	Ceramic
Sensing Geometry	Shear	Shear
Housing Material	Stainless Steel	Stainless Steel
Sealing	Welded Hermetic	Welded Hermetic
Electrical Connector	2-Pin MIL-C-5015	2-Pin MIL-C-5015
Electrical Connection Position	Top	Top

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
081A40	Mounting stud, 1/4-28 x 0.438" long stainless steel screw with hex socket and brass tip	1
085A31	Protective insulated boot	1
ICS-1	Calibration of industrial accel. with full frequency response plot and NIST-traceable certificate	1