Productos

4-channel, line-powered, bridge/differential/icp® sensor signal cond., incremental gain, autozero, usb, ethernet

SIGNAL CONDITIONER, BRIDGE/ICP

Model 482D27

  • CE
  • IP

4-channel, line-powered, bridge/differential/ICP® sensor signal cond., incremental gain, Autozero, USB, Ethernet

    Specification Notes


    [1] AC coupled mode (low frequency response is 0Hz in DC Coupled mode.)
    [2] Typical.
    [3] Adjustable in 0.1V steps.
    [4] Negative excitation can be set to 0V or to track the positive excitation votage.
    [5] Typical, AC Coupled. For ICP or Voltage Input Mode
    [6] See PCB Declaration of Conformance PS024 for details.

    English: SI:
    Performance
    Channels 4 4
    Sensor Input Type(s) ICP®, Voltage, Bridge/Differential ICP®, Voltage, Bridge/Differential
    Voltage Gain (ICP/Voltage Mode) 0.1 to 1000 0.1 to 1000
    Voltage Gain (Bridge/Differential Mode) 0.1 to 1000 0.1 to 1000
    Accuracy (Gain, x0.1 to x0.4) ±5 % ±5 %
    Accuracy (Gain, x0.5 to x0.99) ±1 % ±1 %
    Accuracy (Gain, x1.0 to x1,000) ±0.5 % ±0.5 %
    Accuracy (Excitation) ±1 % ±1 %
    Input Range (Differential) ±5 V ±5 V
    Input Range (Voltage) ±5 V ±5 V
    Output Range (Minimum) ±10 V ±10 V
    Frequency Range (-5 %) (>x100) 0.1 to 50 kHz 0.1 to 50 kHz [1]
    Frequency Range (-5 %) (x0.1 to x99.9 Gain) 0.1 to 225 kHz 0.1 to 225 kHz [1]
    Frequency Range (Bridge Input Mode -5% ) DC to 100 kHz DC to 100 kHz
    Frequency Range (Bridge Input Mode -3dB ) DC to 225 kHz DC to 225 kHz
    Phase Response (at 1 kHz) ±1 ° ±1 °
    Cross Talk (maximum @ 10kHz) -72 dB -72 dB
    Calibration (Shunt) Internal/External Internal/External
    TEDS Sensor Support Yes Yes
    Fault/Bias Monitor/Meter (LED) Open/Short/Overload Open/Short/Overload
    Control Interface
    Digital Control Interface USB-C (2.0) USB-C (2.0)
    Digital Control Interface Ethernet Ethernet
    Human Interface Keypad Keypad
    Display 2 rows, 16 columns 2 rows, 16 columns
    Digital Control: Cable Length(USB) (Maximum) 16.4 ft 5 m
    Environmental
    Temperature Range (Operating) +32 to +120 °F 0 to +50 °C
    Electrical
    Power Required (for supplied AC power adaptor) AC Power AC Power
    AC Power (50 to 60 Hz) 100 to 240 VAC 100 to 240 VAC
    AC Power 1.6 Amps 1.6 Amps
    DC Power ≤2.5 Amps ≤2.5 Amps
    DC Power +9 to 18 VDC +9 to 18 VDC
    Excitation Voltage (To Sensor) >+24 VDC >+24 VDC
    Excitation Voltage (Positive) +0 to 12 V +0 to 12 V [3]
    Excitation Voltage (Negative) -0 to 12 V -0 to 12 V [3] [4]
    Input Imbalance Adjustment (Maximum, Gain <10) ±1.2 V ±1.2 V
    Input Imbalance Adjustment (Maximum, Gain <10) ±0.12 V ±0.12 V
    Common Mode Voltage (Maximum) ±10 V ±10 V
    DC Offset (Stability, Maximum RTI) 5 µV/°C 5 µV/°C
    DC Offset (AC Coupled) ≤50 mV ≤50 mV
    DC Offset (DC Coupled, Gain <100) <10 mV <10 mV
    DC Offset (DC Coupled, Gain <100) <20 mV <20 mV
    Current Output (Excitation, Maximum) 100mA/30mA 100mA/30mA
    Constant Current Excitation (To Sensor) 0 to 20 mA 0 to 20 mA
    Output Impedance ≤50 Ohm ≤50 Ohm
    Impedance (Input) >1 MOhm >1 MOhm
    Broadband Electrical Noise (1 to 10000 Hz) (Gain x1) 17 µV rms 17 µV rms [5]
    Spectral Noise (1 Hz ) (Gain x1) 1.0 µV/√Hz 1.0 µV/√Hz [5]
    Spectral Noise (10 Hz ) (Gain x1) 280 nV/√Hz 280 nV/√Hz [5]
    Spectral Noise (100 Hz ) (Gain x1) 200 nV/√Hz 200 nV/√Hz [5]
    Spectral Noise (1 kHz ) (Gain x1) 200 nV/√Hz 200 nV/√Hz [5]
    Spectral Noise (10 kHz ) (Gain x1) 200 nV/√Hz 200 nV/√Hz [5]
    Broadband Electrical Noise (1 to 10000 Hz) (Gain x10) 32 µV rms 32 µV rms [5]
    Spectral Noise (1 Hz ) (Gain x10) 7.9 µV/√Hz 7.9 µV/√Hz [5]
    Spectral Noise (10 Hz ) (Gain x10) 630 nV/√Hz 630 nV/√Hz [5]
    Spectral Noise (100 Hz ) (Gain x10) 400 µV/√Hz 400 µV/√Hz [5]
    Spectral Noise (1 kHz ) (Gain x10) 350 µV/√Hz 350 µV/√Hz [5]
    Spectral Noise (10 kHz ) (Gain x10) 350 µV/√Hz 350 µV/√Hz [5]
    Broadband Electrical Noise (1 to 10000 Hz) (Gain x100) 180 µV rms 180 µV rms [5]
    Spectral Noise (1 Hz ) (Gain x100) 75 µV/√Hz 75 µV/√Hz [5]
    Spectral Noise (10 Hz ) (Gain x100) 5.0 µV/√Hz 5.0 µV/√Hz [5]
    Spectral Noise (100 Hz ) (Gain x100) 2.5 µV/√Hz 2.5 µV/√Hz [5]
    Spectral Noise (1 kHz ) (Gain x100) 2.0 µV/√Hz 2.0 µV/√Hz [5]
    Spectral Noise (10 kHz ) (Gain x100) 2.0 µV/√Hz 2.0 µV/√Hz [5]
    Broadband Electrical Noise (1 to 10000 Hz) (Gain x1000) 1.8 mV 1.8 mV [5]
    Spectral Noise (1 Hz) (Gain x1000) 790 µV/√Hz 790 µV/√Hz [5]
    Spectral Noise (10 Hz) (Gain x1000) 45 µV/√Hz 45 µV/√Hz [5]
    Spectral Noise (100 Hz) (Gain x1000) 20 µV/√Hz 20 µV/√Hz [5]
    Spectral Noise (1 kHz) (Gain x1000) 20 µV/√Hz 20 µV/√Hz [5]
    Spectral Noise (10 kHz) (Gain x1000) 20 µV/√Hz 20 µV/√Hz [5]
    Broadband Electrical Noise (1 to 10,000 Hz) (Gain x1) 21 µV rms 21 µV rms [2]
    Broadband Electrical Noise (1 to 10,000 Hz) (Gain x10) 27 µV rms 27 µV rms [2]
    Broadband Electrical Noise (1 to 10,000 Hz) (Gain x100) 225 µV rms 225 µV rms
    Broadband Electrical Noise (1 to 10,000 Hz) (Gain x1000) 2.0 mV rms 2.0 mV rms
    Spectral Noise (1 Hz) (Gain x1000) 280 µV/√Hz 280 µV/√Hz [2]
    Spectral Noise (10 Hz) (Gain x1000) 45 µV/√Hz 45 µV/√Hz [2]
    Spectral Noise (100 Hz) (Gain x1000) 22 µV/√Hz 22 µV/√Hz [2]
    Spectral Noise (1 kHz) (Gain x1000) 20 µV/√Hz 20 µV/√Hz [2]
    Spectral Noise (10 kHz) (Gain x1000) 20 µV/√Hz 20 µV/√Hz [2]
    Overload Threshold (±0.2 Vpk) 10 Vpk 10 Vpk
    Physical
    Electrical Connector (ICP® Sensor Input) BNC Jack BNC Jack
    Electrical Connector (Bridge/Differential) 8-socket mini DIN 8-socket mini DIN
    Electrical Connector (Output) BNC Jack BNC Jack
    Electrical Connector (DC Power Input) 6-socket mini DIN 6-socket mini DIN
    Electrical Connector (USB Digital Control) USB-C USB-C
    Electrical Connector (Ethernet) RJ-45 RJ-45
    Size - Width 8.00 in 20 cm
    Size - Height 3.20 in 8.10 cm
    Size - Depth 5.90 in 15 cm
    Weight 2.50 lb 1134 gm

    * All specifications are at room temperature unless otherwise specified.

    Accessories


    Supplied
    017AXX 1
    100-7103-50 1
    488B14/NC Universal AC power adapter, 100-240 VAC/ 50-60 Hz input, 12 VDC output, 6-pin mini DIN (for models 482C16 through 482C64), no line cord 1
    EE75 1

    Product Downloads


    PCB_MCSC Software, EE75_Installer.zip

    Software for signal conditioners - RS232 & Ethernet

    Lantronix Installer

    Ethernet Address Tool