Productos

in-line charge converter, 1 mv/pc, with 0.1 uf blocking cap, for high-temp sensors

IN-LINE CHARGE CONVERTER

Model 422E39

Add to Quote
  • CE
  • IP

In-line charge converter, 1 mV/pC, with 0.1 uF blocking cap, for high-temp sensors

  • Sensitivity: (±2%)1 mV/pC
  • Output Voltage: ±2.5 V
  • Temperature Range: -65 to +250 °F (-54 to +121 °C)
  • Housing Material: Stainless Steel

Specification Notes

[1] Above stated frequency, the amplifier becomes slew rate limited.
[2] The low frequency tolerance is accurate within ±10% of the specified frequency.
[3] Tested using voltage source and input capacitor equal to the feedback capacitor, to simulate a charge output sensor.
[4] See PCB Declaration of Conformance PS024 for details.

English: SI:
Performance
Sensitivity (±2 %) (Charge Conversion) 1 mV/pC 1 mV/pC
Input Range ±2500 pC ±2500 pC
Low Frequency Response (-5 %) 5 Hz 5 Hz [2]
High Frequency Response (2.2 mA) 30 kHz 30 kHz [1]
High Frequency Response (4 mA) 60 kHz 60 kHz [1]
High Frequency Response (20 mA) 100 kHz 100 kHz [1]
Non-Linearity ≤1.0 % FS ≤1.0 % FS
Environmental
Temperature Range (Operating) -65 to +250 °F -54 to +121 °C
Temperature Response (Sensitivity Deviation) <2 % <2 %
Maximum Shock 1000 g pk 9810 m/s² pk
Humidity Range 100 % 100 %
Electrical
Excitation Voltage +18 to 28 VDC +18 to 28 VDC
Constant Current Excitation 2.2 to 20 mA 2.2 to 20 mA
Output Voltage (at specified measurement range) ±2.5 V ±2.5 V
Output Impedance <10 Ohm <10 Ohm
Output Bias Voltage +12.00 to 15.00 VDC +12.00 to 15.00 VDC
Settling Time <6 min <6 min
Output Polarity Inverted Inverted
Maximum Input Voltage 30 V 30 V
Broadband Electrical Noise (1 to 10000 Hz) 14.0 µV -97 dB [3]
Spectral Noise (1 Hz) 8.90 µV/√Hz -101 dB [3]
Spectral Noise (10 Hz) 0.85 µV/√Hz -121 dB [3]
Spectral Noise (100 Hz) 0.31 µV/√Hz -130 dB [3]
Spectral Noise (1 kHz) 0.17 µV/√Hz -135 dB [3]
Spectral Noise (10 kHz) 0.07 µV/√Hz -143 dB [3]
Capacitance (Maximum allowable at input) 20000 pF 20000 pF
Resistance (Minimum required at input) 10000 Ohm 10000 Ohm
Source Capacitance Loading <0.0005 %/pF <0.0005 %/pF
Physical
Housing Material Stainless Steel Stainless Steel
Sealing Welded Welded
Electrical Connector (Input) 10-32 Coaxial Jack 10-32 Coaxial Jack
Electrical Connector (Output) BNC Jack BNC Jack
Size - Diameter 0.52 in 13 mm
Size - Length 3.4 in 86 mm
Weight 1.1 oz 31 gm

* All specifications are at room temperature unless otherwise specified.

Optional Versions

(TLD) TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4

English SI
Temperature Range -40 to +185 °F -40 to +85 °C