Productos

high frequency pressure sensor with 061a01 adapter and ss shell

PRESSURE SENSOR WITH 061A01, SS SHELL

Model 113M234

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
More on the way Call for Lead Time
  • CE
  • IP

High frequency pressure sensor with 061A01 adapter and SS shell

  • Measurement Range: 15000 psi (103420 kPa)
  • Sensing Element: Quartz
  • Electrical Connector: 10-32 Coaxial Jack
  • Weight: 0.459 oz (13.0 gm)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Emralon coated
[4] See PCB Declaration of Conformance PS158 for details.

English: SI:
Performance
Sensitivity (±15 %) 0.39 pC/psi 0.056 pC/kPa
Sensitivity (±15 %) 0.39 pC/psi 0.056 pC/kPa
Measurement Range 15000 psi 103420 kPa
Maximum Pressure 15000 psi 103420 kPa
Resonant Frequency ≥500 kHz ≥500 kHz
Rise Time (Reflected) ≤1.0 µ sec ≤1.0 µ sec
Non-Linearity ≤1.0 % FS ≤1.0 % FS [1]
Environmental
Maximum Shock 20000 g pk 196000 m/s² pk
Acceleration Sensitivity 0.002 psi/g 0.0014 kPa/(m/s²) [2]
Temperature Range (Operating) -100 to 275 °F -73 to 135 °C
Temperature Coefficient of Sensitivity ≤0.03 %/°F ≤0.054 %/°C
Maximum Flash Temperature 3000 °F 1649 °C
Maximum Vibration 2000 g pk 19600 m/s² pk
Electrical
Output Polarity (Positive Pressure) Negative Negative
Capacitance 12 pF 12 pF [2]
Electrical Isolation 100000000 Ohm 100000000 Ohm
Insulation Resistance (at room temp) ≥1000000000000 Ohm ≥1000000000000 Ohm
Insulation Resistance (at room temp) ≥1000000000000 Ohm ≥1000000000000 Ohm
Physical
Sensing Element Quartz Quartz
Sensing Geometry Compression Compression
Housing Material (probe) 17-4 Stainless Steel 17-4 Stainless Steel [3]
Diaphragm Invar Invar
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Weight 0.459 oz 13.0 gm
Thread Adaptor Material 17-4 Stainless Steel 17-4 Stainless Steel

* All specifications are at room temperature unless otherwise specified.

Accessories
Supplied
PCS-1BC 0
065A03 Seal ring, 0.435" OD x 0.377" ID x 0.030" thk, brass (for Series 101 and 102, and Model 061A01) 3