Productos

sensor for miniature instrumented impulse hammer (086e80), 0 to 50 lbf

SENSOR FOR MINIATURE IMPULSE HAMMER

Model 086M112

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
  • CE
  • IP

Sensor for Miniature Instrumented Impulse Hammer (086E80), 0 to 50 lbf

  • Sensitivity: (±20%)100 mV/lbf (22.5 mV/N)
  • Measurement Range: 50 lbf pk (222 N pk)
  • Hammer Mass: 0.048 oz (1.36 gm)

Specification Notes

[1] Typical.
[2] Steel tip with no extender mass.
[1] Typical.
[3] See PCB Declaration of Conformance PS136 for details.

English: SI:
Performance
Sensitivity (±20 %) 100 mV/lbf 22.5 mV/N [2]
Measurement Range 50 lbf pk 222 N pk
Resonant Frequency ≥100 kHz ≥100 kHz
Non-Linearity ≤1 % ≤1 % [1]
Electrical
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance <100 Ohm <100 Ohm
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
Discharge Time Constant ≥100 sec ≥100 sec [1]
Physical
Sensing Element Quartz Quartz
Sealing Epoxy Epoxy
Hammer Mass 0.048 oz 1.36 gm
Head Diameter 0.25 in 6.3 mm
Tip Diameter 0.10 in 2.5 mm
Hammer Length 0.5 in 12.7 mm
Electrical Connection Position Side Side
Electrical Connector 5-44 Coaxial 5-44 Coaxial

* All specifications are at room temperature unless otherwise specified.

Accessories
Supplied
HCS-2 Calibration of Series 086B to 086D instrumented hammers only 1