uht-12™, high temperature, charge mode accelerometer kit containing a side exit accelerometer with shear sensing crystal, 10 ft integral hard-line cable, and integral charge amplifier

HIGH TEMPERATURE ACCELEROMETER

Model EX600B14

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
More on the way Call for Lead Time
  • CE
  • EX
  • IP

UHT-12™, high temperature, charge mode accelerometer kit containing a side exit accelerometer with shear sensing crystal, 10 ft integral hard-line cable, and integral charge amplifier

  • Sensitivity: (±5%)10 mV/g (1.02 mV/(m/s²))
  • Sensing Element: UHT-12™
  • Measurement Range: ±500 g (±4900 m/s²)
  • Weight: 10.5 oz (300 gm)

Specification Notes

[1] Conversion Factor 1g = 9.81 m/s².
[2] 1Hz = 60 cpm (cycles per minute).
[3] Zero-based, least-squares, straight line method.
[4] The high frequency tolerance is accurate within ±10% of the specified frequency.
[5] Typical value.
[1] Conversion Factor 1g = 9.81 m/s².
[5] Typical value.
[1] Conversion Factor 1g = 9.81 m/s².
[5] Typical value.
[6] See PCB Declaration of Conformance PS116 for details.

English: SI:
Performance
Sensitivity (±5 %) 10 mV/g 1.02 mV/(m/s²) [1]
Measurement Range (Peak) ±500 g ±4900 m/s²
Frequency Range (±5 %) 282 to 210000 cpm 4.7 to 3500 Hz [2] [4]
Frequency Range (±10 %) 204 to 300000 cpm 3.4 to 5000 Hz
Resonant Frequency 1200 kcpm 20 kHz [5]
Broadband Resolution (1) 4 mg 39 mm/s² [1] [5]
Non-Linearity ±1 % ±1 % [3]
Transverse Sensitivity <5 % <5 %
Environmental
Overload Limit (Shock) 1000 g pk 9810 m/s² pk [1]
Temperature Range (Accelerometer) -65 to +900 °F -54 to +482 °C
Temperature Range (Charge Amplifier) -60 to +250 °F -51 to +121 °C
Temperature Response See Graph %/°F See Graph %/°F [5]
Base Strain Sensitivity ≤0.01 g/µε ≤0.1 (m/s²)/µε [1]
Electrical
Settling Time (at 70 °F within 1% of bias) ≤1.0 sec ≤1.0 sec
Discharge Time Constant ≥.10 sec ≥.10 sec
Excitation Voltage 22 to 28 VDC 22 to 28 VDC
Constant Current Excitation 2.2 to 20 mA 2.2 to 20 mA
Output Impedance 1000 Ohm 1000 Ohm [5]
Output Bias Voltage 12 to 16 VDC 12 to 16 VDC
Spectral Noise (10 Hz) 260 µg/√Hz 2550 (µm/sec2)/√Hz [1] [5]
Spectral Noise (100 Hz) 60 µg/√Hz 590 (µm/sec2)/√Hz [1] [5]
Spectral Noise (1 kHz) 30 µg/√Hz 295 (µm/sec2)/√Hz [1] [5]
Electrical Isolation 100000000 Ohm 100000000 Ohm
Physical
Size - Diameter 1.5 in 38.1 mm
Size - Height 0.75 in 19.1 mm
Weight (with cable) 10.5 oz 300 gm
Mounting Through Holes (3) Through Holes (3)
Sensing Element UHT-12™ UHT-12™
Sensing Geometry Shear Shear
Housing Material Inconel Inconel
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015
Electrical Connection Position Side Side
Cable Length 10 ft 3 m
Cable Type Integral Hardline Cable Integral Hardline Cable

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories
Supplied
ICS-1 Calibration of industrial accel. with full frequency response plot and NIST-traceable certificate 1
081A99 Socket head cap screw, 8-32 x 0.5" long, 18-8 stainless steel 3