ring-style, industrial, ceramic shear icp® accel, 500 mv/g, 0.2 to 6k hz, side exit, 2-pin conn., frequency sweep iso 17025 accredited calibration

ACCELEROMETER

Model 625B02

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock	Lead Times
More on the way	Call for Lead Time

Ring-style, industrial, ceramic shear ICP® accel, 500 mV/g, 0.2 to 6k Hz, side exit, 2-pin conn., frequency sweep ISO 17025 accredited calibration

Sensitivity: (±5%)500 mV/g (51 mV/(m/s²))
Frequency Range: (±3dB)12 to 360000 cpm (0.2 to 6000 Hz)
Sensing Element: Ceramic
Measurement Range: ±10 g (±98 m/s²)
Weight: 6.1 oz (173 gm)

Specification Notes

[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] The high frequency tolerance is accurate within ±10% of the specified frequency.
[4] Typical.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Sensitivity (±5 %)	500 mV/g	51 mV/(m/s²)	[1]
Measurement Range	±10 g	±98 m/s²
Frequency Range (±5 %)	30 to 120000 cpm	0.5 to 2000 Hz	[3]
Frequency Range (±10 %)	22 to 240000 cpm	0.37 to 4000 Hz
Frequency Range (±3 dB)	12 to 360000 cpm	0.2 to 6000 Hz
Resonant Frequency	720 kcpm	12 kHz	[4]
Broadband Resolution (1)	15 µg	147 µm/sec²	[4]
Non-Linearity	±1 %	±1 %	[2]
Transverse Sensitivity	≤7 %	≤7 %
Environmental
Overload Limit (Shock)	2500 g pk	24525 m/s² pk
Temperature Range	-65 to +250 °F	-54 to +121 °C
Temperature Response	See Graph %/°F	See Graph %/°F	[4]
Enclosure Rating	IP68	IP68
Electrical
Settling Time (within 1% of bias)	≤4.5 sec	≤4.5 sec
Discharge Time Constant	≥1.0 sec	≥1.0 sec
Excitation Voltage	18 to 28 VDC	18 to 28 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	<100 Ohm	<100 Ohm
Output Bias Voltage	8 to 12 VDC	8 to 12 VDC
Spectral Noise (10 Hz)	0.9 µg/√Hz	8.8 (µm/sec²)/√Hz	[4]
Spectral Noise (100 Hz)	0.7 µg/√Hz	7.0 (µm/sec²)/√Hz	[4]
Spectral Noise (1 kHz)	0.3 µg/√Hz	3.1 (µm/sec²)/√Hz	[4]
Electrical Protection	RFI/ESD	RFI/ESD
Electrical Isolation (Case)	>100000000 Ohm	>100000000 Ohm
Physical
Size - Diameter	1.3 in	35.1 mm
Size - Height	1 1/8 in	28.7 mm
Weight	6.1 oz	173 gm
Mounting	Through Hole	Through Hole
Mounting Thread	1/4-28 Male	1/4-28 Male	[5]
Mounting Torque	2 to 5 ft-lb	2.7 to 6.8 Nm
Sensing Element	Ceramic	Ceramic
Sensing Geometry	Shear	Shear
Housing Material	Stainless Steel	Stainless Steel
Sealing	Welded Hermetic	Welded Hermetic
Electrical Connector	2-Pin MIL-C-5015	2-Pin MIL-C-5015
Electrical Connection Position	Side	Side

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
ICS-1	Calibration of industrial accel. with full frequency response plot and NIST-traceable certificate	1
080B45	Protective thermal boot for use with series 625 sensors	1
081A73	1/4-28 x 1.34" hex head captive thru bolt	1

Optional Versions

(LB) Low Bias Voltage

	English	SI
Output Bias Voltage	6 to 8
Measurement Range	±7	±69
Excitation Voltage	12 to 28

(M) Metric Mount

Accessories:
Supplied	M081A73	Captive Mounting Bolt	1

(TO) Temperature Output

	English	SI
Temperature Scale Factor	5.56 mV/°F + 32	+10 mV/°C
Electrical Connector	3-Pin
Electrical Connections	Ground
Temperature Output Range	+36 to +250	+2 to +121
Electrical Connections	Acceleration Output
Electrical Connections	Temperature Output