1/4 pressure prepolarized 377a14 microphone and 426a05 preamplifier, teds programmed

ICP Microphone System

Model 378A14

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock Lead Times
4 Lead Time for 1-5 is 6 Wks.
Lead Time for 6-10 is 7 Wks.
  • CE
  • IP

1/4" pressure prepolarized 377A14 microphone and 426A05 preamplifier, TEDS programmed

This model includes a 1/4" microphone cartridge, a mated preamplifier with TEDS, and system calibration. Click the following for individual component information.
377A14
426A05
  • Nominal Microphone Diameter: 1/4"
  • Frequency Response Characteristic: Pressure
  • Frequency Range: (±2dB)4.0 to 70000 Hz (4.0 to 70000 Hz)
  • Dynamic Range: 173 dB re 20 µPa

Specification Notes


[1] Typical.
[2] TEDS Capable Digital Communication, compliant with IEEE 1451.4
[3] re 250 Hz
[4] A-Weighted inherent noise is specified from 20 Hz - 20 kHz.
[1] Typical.
[3] re 250 Hz
[5] Prepolarized
[1] Typical.
[6] See PCB Declaration of Conformance PS076 for details.

English: SI:
Performance
Nominal Microphone Diameter 1/4" 1/4"
Frequency Response Characteristic Pressure Pressure
Sensitivity (±3 dB) -60 dB re 1 V/Pa -60 dB re 1 V/Pa [3]
Sensitivity 1.0 mV/Pa 1.0 mV/Pa [3]
Frequency Range (±2 dB) 4.0 to 70000 Hz 4.0 to 70000 Hz
Lower Limiting Frequency (-3 dB) 0.75 to 4.0 Hz 0.75 to 4.0 Hz
Inherent Noise 50 dB(A) re 20 µPa 50 dB(A) re 20 µPa [1] [4]
Dynamic Range (3% Distortion Limit) 173 dB re 20 µPa 173 dB re 20 µPa [1]
TEDS Compliant Yes Yes [2]
Environmental
Temperature Range (Operating) -40 to +158 °F -40 to +70 °C
Temperature Coefficient of Sensitivity (+14 to +158°F (-10 to +70°C)) 0.004 dB/°F 0.007 dB/°C [1] [3]
Static Pressure Coefficient -0.003 dB/kPa -0.003 dB/kPa [1] [3]
Humidity Coefficient of Sensitivity (0 to 100%, non-condensing) ±0.0014 dB/%RH ±0.0014 dB/%RH [3]
Influence of Axial Vibration (0.1g (1 m/s²)) 66 dB re 20 µPa 66 dB re 20 µPa [1]
Electrical
Polarization Voltage 0 V 0 V [5]
Excitation Voltage 20 to 32 VDC 20 to 32 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Bias Voltage 10 to 14 VDC 10 to 14 VDC
Maximum Output Voltage ±8 Vpk ±8 Vpk
Output Impedance <50 Ohm <50 Ohm
Physical
Housing Material Stainless Alloy Stainless Alloy
Venting Side Side
Electrical Connector 10-32 Jack 10-32 Jack
Mounting Thread (Preamplifier) 0.25 - 60 UNS 0.25 - 60 UNS
Size - Diameter (with grid) 0.28 in 7.1 mm
Size - Diameter (without grid) 0.25 6.35 mm
Size - Height (with grid) 2.07 in 52.6 mm
Size - Height (without grid) 2.02 in 51.3 mm
Weight 0.27 oz 7.8 gm [1]

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
ACS-63 Calibration for microphone/preamplifier with TEDS programming 1

Product Videos


Build Out Your Measurement Chain


079A53
Model: 079A53

Miniature Windscreen for 0.25 inch micro...

$32.00 USD

(Pricing valid only in the U.S.)

079A07
Model: 079A07

Windscreen (for 1/4-inch microphones)

$40.00 USD

(Pricing valid only in the U.S.)

079A15
Model: 079A15

Microphone stand (with boom attachment &...

$80.00 USD

(Pricing valid only in the U.S.)

079A18
Model: 079A18

Clamp-on flexible extension arm

$150.00 USD

(Pricing valid only in the U.S.)

079B10
Model: 079B10

Microphone holder (for 1/4-inch micropho...

$50.00 USD

(Pricing valid only in the U.S.)

079B32
Model: 079B32

1/4 inch array holder (for 1/2 inch diam...

$23.00 USD

(Pricing valid only in the U.S.)

079C20
Model: 079C20

Nose cone (for 1/4 inch microphone)

$350.00 USD

(Pricing valid only in the U.S.)