icp® signal cond., 35mm din-rail mount, peak&hold, clamping and analog output, ac/dc coupling, gain, setup configurable via usb or ethernet communications

ICP® SIGNAL CONDITIONER, AC/DC & CLAMP

Model 410D01

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
More on the way Call for Lead Time
  • CE
  • IP

ICP® Signal cond., 35mm DIN-rail mount, peak&hold, clamping and analog output, AC/DC coupling, gain, setup configurable via USB or Ethernet communications

    Specification Notes

    [1] Typical.
    [2] Optically isolated contact closure.
    [3] See PCB Declaration of Conformance PS024 for details.

    English: SI:
    Performance
    Channels 1 1
    Sensor Input Type(s) ICP® ICP®
    Voltage Gain (+/-10%)Software Selectable ) X1 X2 X4 X8 X10 X16 X20 X1 X2 X4 X8 X10 X16 X20
    Output Range (Digital ) (Peak Hold) 0 to 10 V 0 to 10 V
    Output Range (Analog Signal) ±10 V ±10 V
    Low Frequency Response (+/-10 %) (AC mode) 1.0 Hz 1.0 Hz
    Low Frequency Response (DC mode) Governed by Sensor DTC Governed by Sensor DTC
    High Frequency Response (+/-5% ) 1 kHz 1 kHz
    Control Interface
    Digital Control Interface USB USB
    Human Interface Downloadable Software Configurator Downloadable Software Configurator
    Display None None
    Environmental
    Temperature Range -40 to 158 °F -40 to 70 °C
    Electrical
    DC Power (±10 %) 24 VDC 24 VDC
    DC Power (Maximum ) 350 mA 350 mA
    Excitation Voltage (To Sensor) 20 VDC 20 VDC [1]
    DC Offset (After reset) ≤70 mV ≤70 mV [1]
    Constant Current Excitation (To Sensor) 4 mA 4 mA [1]
    Discharge Time Constant (AC mode) 0.6 sec 0.6 sec [1]
    Broadband Electrical Noise (1 to 10 kHz) (Gain x1) 20 µV rms 20 µV rms [1]
    Input (Reset) Optically Isolated Optically Isolated
    Polarity (Tension/Compression) Software Selectable Software Selectable
    Physical
    Electrical Connector (ICP® Sensor Input) BNC Jack BNC Jack
    Electrical Connector (Peak Analog Output) Screw Terminal Screw Terminal
    Electrical Connector (Wave Form Analog Output) Screw Terminal Screw Terminal
    Electrical Connector (Analog Output Common) Screw Terminal Screw Terminal [2]
    Electrical Connector (Input Reset) Screw Terminal Screw Terminal
    Electrical Connector (USB Interface) Type B Type B
    Mounting DIN Rail DIN Rail
    Size - Height 3.9 in 99 mm
    Size - Width 1.78 in 45.2 mm
    Size - Length 4.46 in 113.3 mm
    Weight 0.46 lb 208 gm [1]

    * All specifications are at room temperature unless otherwise specified.

    Accessories
    Supplied
    100-16427-40 1