torkdisc®, rotary torque sensor, 16-bit digital telemetry system, 180k in-lb fs, 4500 rpm max

TORKDISC ROTARY TORQUE SENSOR, 180K

Model 5310D-01A

Add to Quote
  • CE
  • IP

TORKDISC®, rotary torque sensor, 16-bit digital telemetry system, 180k in-lb FS, 4500 rpm max

TORKDISC® System comes complete with receiver unit, 24 foot cable, and 12 VDC power supply.


Cable Length Options: 24, 80, 112 and 176 feet


  • Measurement Range: 180000 in-lb (20337 Nm)
  • Temperature Range: +32 to +185 °F (0 to +85 °C)
  • Torsional Stiffness: 1100000000 in-lb/radian (124283 kN-m/radian)
  • Overload Limit: 268000 in-lb (30280 Nm)
  • Weight: 100 lb (45.4 kg)

Specification Notes

[1] Request Technical Note FTQ-STN5 regarding digital output signal.
[2] Extraneous load limits reflect the maximum axial load, lateral load, and bending moment that may be applied singularly without electrical or mechanical damage to the sensor.
[3] Where combined extraneous loads are applied, decrease loads proportionally.
[4] Request Application Note AP-1015 regarding the effects of extraneous loads on the torque sensor output.
[5] Output can be filtered via internal DIP switch (33, 55, 125, 250, 450 Hz).
[6] Root sum square of non-linearity, hysteresis, and non repeatability.
[7] Bolt joint slip torque is calculated assuming a coefficient of friction (µ) of 0.1 and that grade 8 socket head cap screws are used and tightened to 75% of yield.
[8] See PCB Declaration of Conformance PS069 for details.

English: SI:
Performance
Measurement Range (Full Scale Capacity) 180000 in-lb 20337 Nm
Accuracy ±0.10 % FS ±0.10 % FS [6]
Voltage Output ±10 V ±10 V
Frequency Output 10 kHz ± 5 kHz 10 kHz ± 5 kHz
Digital Output QSPI QSPI [1]
Maximum Load (Axial) 13500 lb 60.1 kN [2] [3] [4]
Maximum Load (Lateral) 13500 lb 60.1 kN [2] [3] [4]
Maximum Moment 90000 in-lb 10169 Nm [2] [3] [4]
Accuracy ±0.10 % FS ±0.10 % FS [6]
Frequency Range 2000 Hz 2000 Hz [5]
Environmental
Overload Limit (Bolt Joint Slip) 268000 in-lb 30280 Nm [7]
Overload Limit (Failure) 720000 in-lb 81349 Nm
Overload Limit (Safe) 540000 in-lb 61012 Nm
Temperature Range (Operating) +32 to +185 °F 0 to +85 °C
Temperature Range (Compensated) +70 to +170 °F +21 to +77 °C
Temperature Effect on Output (within compensated range) 0.002 %FS/°F 0.0036 %FS/°C
Temperature Effect on Zero Balance (within compensated range) 0.002 %FS/°F 0.0036 %FS/°C
Electrical
Power Required (50 to 60 Hz) 90 to 240 VAC 90 to 240 VAC
Digital Resolution 16 Bit 16 Bit
Digital Sample Rate 26000 samples/sec 26000 samples/sec
Physical
Maximum Speed 4500 RPM 4500 RPM
Permissible Axial Float (rotor to stator) 0.25 in 6.4 mm
Permissible Radial Float (rotor to stator) 0.25 in 6.4 mm
Rotating Inertia 20.15 lb-ft² 0.849 kg-m²
Torsional Stiffness 1100000000 in-lb/radian 124283 kN-m/radian
Torsional Angle (at Full Scale Capacity) 0.010 ° 0.010 °
Material (Sensor) Plated Steel Plated Steel
Weight 100 lb 45.4 kg

* All specifications are at room temperature unless otherwise specified.

Accessories
Supplied
182-028A 25-pin(M) D-sub conn. (mating connector for 53xxC Series receiver outputs) 1
8314-06-24A 24-ft long black coaxial cable (RG58/U), BNC plug to TNC male plug 1