1/2 free-field, prepolarized condenser microphone, typical sensitivity= 50 mv/pa (+/-1.5 db), 3.15 hz to 20 khz (+/-2 db).

Precision Condenser Microphone

Model 377B02

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock Lead Times
More on the way Lead Time for 1-5 is 5 Dys.
Lead Time for 6-10 is 10 Dys.
Lead Time for 11-15 is 20 Dys.
Lead Time for 11-15 is 20 Dys.
  • CE
  • IP

1/2" free-field, prepolarized condenser microphone, typical sensitivity= 50 mV/Pa (+/-1.5 dB), 3.15 Hz to 20 kHz (+/-2 dB).

  • Nominal Microphone Diameter: 1/2"
  • Frequency Response Characteristic: Free-Field
  • Frequency Range: (±2dB)3.15 to 20000 Hz
  • Dynamic Range: 147 dB re 20 µPa

Specification Notes


[1] Typical.
[2] re 250 Hz
[1] Typical.
[2] re 250 Hz
[1] Typical.
[3] Prepolarized
[1] Typical.
[4] See PCB Declaration of Conformance PS167 for details.

English: SI:
Performance
Nominal Microphone Diameter 1/2" 1/2"
Frequency Response Characteristic (at 0° incidence) Free-Field Free-Field
Open Circuit Sensitivity (±1.5 dB) -26 dB re 1 V/Pa -26 dB re 1 V/Pa [2]
Open Circuit Sensitivity 50 mV/Pa 50 mV/Pa [2]
Frequency Range (±2 dB) 3.15 to 20000 Hz 3.15 to 20000 Hz
Frequency Range (±1 dB) 5 to 10000 Hz 5 to 10000 Hz
Lower Limiting Frequency (-3 dB) 1.0 to 2.4 Hz 1.0 to 2.4 Hz
Resonant Frequency (90° Phase Shift) 10400 Hz 10400 Hz [1]
Inherent Noise 15 dB(A) re 20 µPa 15 dB(A) re 20 µPa [1]
Dynamic Range (3% Distortion Limit) 147 dB re 20 µPa 147 dB re 20 µPa [1]
Standards Designation (IEC 61094-4) WS2F WS2F
Environmental
Temperature Range (Operating) -40 to +302 °F -40 to +150 °C
Temperature Coefficient of Sensitivity (+14 to +122°F (-10 to +50°C)) 0.005 dB/°F 0.009 dB/°C [1] [2]
Static Pressure Coefficient -0.013 dB/kPa -0.013 dB/kPa [1] [2]
Humidity Coefficient of Sensitivity (0 to 100%, non-condensing) ±0.001 dB/%RH ±0.001 dB/%RH [2]
Influence of Axial Vibration (0.1g (1 m/s²)) 63 dB re 20 µPa 63 dB re 20 µPa [1]
Electrical
Capacitance (Polarized) 12 pF 12 pF [1]
Polarization Voltage 0 V 0 V [3]
Physical
Housing Material Stainless Alloy Stainless Alloy
Venting Rear Rear
Mounting Thread 0.4606 - 60 UNS 11.7 mm - 60 UNS
Mounting Thread 0.5 - 60 UNS 12.7 mm - 60 UNS
Size - Diameter (with grid) 0.52 in 13.2 mm
Size - Diameter (without grid) 0.5 in 12.7 mm
Size - Height (with grid) 0.64 in 16.2 mm
Size - Height (without grid) 0.6 in 15.3 mm
Weight 0.28 oz 7.8 gm [1]

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
ACS-20 Calibration of precision condenser microphones 1

Product Videos


Build Out Your Measurement Chain


079A06
Model: 079A06

Windscreen (for 1/2-inch microphones)

$40.00 USD

(Pricing valid only in the U.S.)

079A06
Model: 079A06

Windscreen (for 1/2-inch microphones)

$40.00 USD

(Pricing valid only in the U.S.)

079A11
Model: 079A11

Microphone holder (for 1/2-inch micropho...

$50.00 USD

(Pricing valid only in the U.S.)

079A15
Model: 079A15

Microphone stand (with boom attachment &...

$80.00 USD

(Pricing valid only in the U.S.)

079A15
Model: 079A15

Microphone stand (with boom attachment &...

$80.00 USD

(Pricing valid only in the U.S.)

079A18
Model: 079A18

Clamp-on flexible extension arm

$150.00 USD

(Pricing valid only in the U.S.)

079A18
Model: 079A18

Clamp-on flexible extension arm

$150.00 USD

(Pricing valid only in the U.S.)