icp® accel., shock, 0.05 mv/g, 100,000 g, 4 to 10 khz, 10-ft integral cable, 1/4-28 stud, filtered mechanically isolated

SHOCK, ICP® ACCELEROMETER

Model 350B01

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock	Lead Times
1	Call for Lead Time

ICP® Accel., Shock, 0.05 mV/g, 100,000 g, 4 to 10 kHz, 10-ft Integral Cable, 1/4-28 Stud, Filtered mechanically isolated

Sensitivity: (±30%)0.05 mV/g (0.005 mV/(m/s²))
Measurement Range: ±100000 g pk (±981000 m/s² pk)
Frequency Range: (±1dB)4 to 10000 Hz
Electrical Filter Corner Frequency: (-3dB)17 kHz
Mechanical Filter Resonant Frequency: 35 kHz
Weight: 0.20 oz (5.5 gm)

Additional configurations:

Specification Notes

[1] Typical.
[2] Typical corner frequency for coupled electrical and mechanical filters.
[3] Electrical filter is a second order filter.
[4] Amplitude at resonance is +9 dB.
[1] Typical.
[5] Test conducted on shaker at 100Hz.
[1] Typical.
[6] See PCB Declaration of Conformance PS135 for details.

	English:	SI:
Performance
Sensitivity (±30 %)	0.05 mV/g	0.005 mV/(m/s²)
Measurement Range	±100000 g pk	±981000 m/s² pk
Frequency Range (±1 dB)	4 to 10000 Hz	4 to 10000 Hz
Frequency Range (-3 dB)	2 to 25000 Hz	2 to 25000 Hz	[2]
Electrical Filter Corner Frequency (-3 dB)	17 kHz	17 kHz	[1] [3]
Mechanical Filter Resonant Frequency	35 kHz	35 kHz	[1] [4]
Resonant Frequency	≥100 kHz	≥100 kHz
Broadband Resolution (1)	0.5 g rms	4.9 m/s² rms	[1]
Non-Linearity (per 10,000 g (98,100 m/s²))	2.5 %	2.5 %
Transverse Sensitivity	≤7 %	≤7 %
Environmental
Overload Limit (Shock)	±150000 g pk	±1471500 m/s² pk
Temperature Range (Operating)	-10 to +150 °F	-23 to +66 °C
Temperature Range (Storage)	-40 to +200 °F	-40 to +93 °C
Temperature Response	See Graph %/°F	See Graph %/°F	[1] [5]
Electrical
Excitation Voltage	20 to 30 VDC	20 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤200 Ohm	≤200 Ohm
Output Bias Voltage	8 to 14 VDC	8 to 14 VDC
Discharge Time Constant	0.10 sec	0.10 sec	[1]
Settling Time (within 10% of bias)	<1 sec	<1 sec
Electrical Isolation (Case)	>1000000 Ohm	>1000000 Ohm
Physical
Sensing Element	Ceramic	Ceramic
Sensing Geometry	Shear	Shear
Housing Material	Titanium	Titanium
Sealing	Hermetic	Hermetic
Size - Hex	0.375 in	9.5 mm
Size - Height	1.04 in	26.5 mm
Weight (without cable)	0.20 oz	5.5 gm	[1]
Electrical Connector	Integral Cable	Integral Cable
Cable Length	10 ft	3.05 m
Cable Type	031 Twisted Pair	031 Twisted Pair
Mounting Thread	1/4-28 Male	1/4-28 Male

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
ACS-14	High G accel. verification using Hopkinson bar to max g range, (NIST traceable).	1
ACS-22	OBSOLETE see ACS-22/ACS-14 Amplitude response cal for shock accel, 100 Hz to upper 1 dB freq (max 15 kHz)	1