portable vibration calibrator with 5-10k hz frequency range adjustable amplitude ranges (acceleration, velocity, displacement). calibrates all types of vibration transducers. lcd readout in english or metric units

CALIBRATION SHAKER

Model 699B06

Add to Quote
  • CE
  • IP

Portable Vibration Calibrator with 5-10k Hz frequency range adjustable amplitude ranges (acceleration, velocity, displacement). Calibrates all types of vibration transducers. LCD readout in English or metric units

  • Maximum Load: 28.2 oz (800 gm)

Specification Notes

[1] Operating range reduced at higher payloads. Reference manual for full details.
[2] Up to 10g pk
[3] Up to 5g pk
[4] As shipped from factory in new condition
[5] See PCB Declaration of Conformance PS146 for details.

English: SI:
Performance
Maximum Load 28.2 oz 800 gm [1]
Frequency Range (operating, 100 gram payload) 5 to 10000 Hz 300 to 600000 cpm
Accuracy ((Acceleration (10 Hz to 10 khz)) ±3 % ±3 %
Accuracy ((Acceleration (5 Hz to 10 Hz)) ±5 % ±5 %
Accuracy (Velocity (10 Hz to 1000 Hz)) ±3 % ±3 %
Accuracy (Displacement (30 Hz to 150 Hz)) ±3 % ±3 %
Amplitude Linearity (100 gram payload, 100 Hz) 1% 1% [2]
Distortion (100 gram payload, 30 Hz to 2 kHz) <5 % <5 % [3]
Maximum Amplitude (Acc 50 Hz,10 gram payload) 20 g pk 196 m/s^2 pk
Maximum Amplitude (Vel 50 Hz, 10 gram payload) 20 in/sec pk 500 mm/s pk
Maximum Amplitude (Displ 50 Hz, 10 gram payload) 150 mils pk-pk 3.8 mm pk-pk
Maximum Amplitude (Acc 50 Hz, 500 gram payload) 2.5 g pk 24.5 m/s² pk
Maximum Amplitude (Vel 50 Hz, 500 gram payload) 3.5 in/s pk 90 mm/s pk
Control Interface
Test Operation Manual (closed Loop) or Semi-Automatic Manual (closed Loop) or Semi-Automatic
External Source In (Max) 1V AC RMS 1V AC RMS
Monitor Reference Out 10 mV/g (nominal), Quartz Reference Accelerometer, BNC Jack Output 10 mV/g (nominal), Quartz Reference Accelerometer, BNC Jack Output
Display Units (Acceleration) g pk & RMS m/s² pk & RMS
Display Units (Velocity) in/sec pk & RMS mm/sec pk & RMS
Display Units (Displacement) mils pk-pk um pk-pk
Display Units (Frequency) Hz CPM
Environmental
Temperature Range (Operating) 32 to 122 °F 0 to 50 °C
Electrical
Power Required (AC Power (for recharging battery)) 110-240 V, 50-60 Hz 110-240 V, 50-60 Hz
Power Required (Internal Battery (sealed solid gel lead acid)) 12 VDC, 4 amp hours 12 VDC, 4 amp hours
Power Required (Input from Charger) 18 VDC, 1A 18 VDC, 1A
Battery Life (100 gram payload, 100 Hz 1g pk) 18 hours 18 hours [4]
Battery Life (100 gram payload, 100 Hz 10g pk) 1 hour 1 hour [4]
Physical
Storage Semi-Automated test routine calibration settings Semi-Automated test routine calibration settings
Points Per Record 30 calibration data points 30 calibration data points
USB Port Loading Semi-Automating testing routines, provides power for external power supplies Loading Semi-Automating testing routines, provides power for external power supplies
Size - Width 12 in 30.5 cm
Size - Depth 10 in 28 cm
Size - Height 8.5 in 22 cm
Weight 18 lb 8.2 kg
Mounting Thread 1/4-28 Female No Metric Equivalent

* All specifications are at room temperature unless otherwise specified.

Accessories
Supplied
081A08 Mounting stud, 10-32 to 1/4-28 x 0.30" long, BeCu 1
081B20 Mounting stud, 1/4-28 to 1/4-28 x 0.365" long, BeCu w/shoulder 1
081M165 Mounting stud 1/4-28 to M8X1.0 BeCu 1
600A25 18 Volt, 1 amp power supply / charger for 699x06/07 Portable Vibration Calibrator, universal 100-240 V, 50/60 Hz. 1
600A34 1
600A54 M8x1.25 Mounting Pad 1
600A55 M8x1 Mounting Pad 1
600A56 Mounting Plate, 3 and 4-Hole High Temp Vibration Sensors 1
600A57 Mounting Plate, 3 and 4-Hole High Temp Vibration Sensors 1
ICS-41 1
M081A63 Mounting stud, 1/4-28 to M8x1.25 x 10.2 mm long, BeCu 1
USB DRIVE 1