pressure sensor

PRESSURE SENSOR

Model 113B55

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
0 Call for Lead Time
  • CE
  • IP

Pressure Sensor

    Specification Notes

    [1] Zero-based, least-squares, straight line method.
    [2] Typical.
    [3] For +10 volt output, minimum 24 VDC supply voltage required. Negative 10 volt output may be limited by output bias.
    [2] Typical.
    [4] Maximum.
    [5] See PCB Declaration of Conformance PS023 for details.

    English: SI:
    Performance
    Measurement Range (for ±5V output) 500 psi 3448 kPa
    Useful Overrange (for ± 10V output) 1 kpsi 6895 kPa [3]
    Sensitivity (±15 %) 10 mV/psi 1.45 mV/kPa
    Maximum Pressure 1 kpsi 6895 kPa
    Resolution 10 mpsi 0.0069 kPa [2]
    Resonant Frequency >500 kHz >500 kHz
    Rise Time ≤1.0 µ sec ≤1.0 µ sec
    Low Frequency Response (-5 %) 0.05 Hz 0.05 Hz
    Non-Linearity ≤1.0 % FS ≤1.0 % FS [1]
    Environmental
    Acceleration Sensitivity 0.01 psi/g 0.0069 kPa/(m/s²) [4]
    Acceleration Sensitivity .005 psi/g .0035 kPa/(m/s²) [2]
    Temperature Range (Operating) -100 to +275 °F -73 to +135 °C
    Temperature Coefficient of Sensitivity ≤0.03 %/°F ≤0.054 %/°C
    Maximum Vibration 2000 g pk 19613 m/s² pk
    Maximum Shock 2000 g pk 19613 m/s² pk
    Electrical
    Output Polarity (Positive Pressure) Positive Positive
    Discharge Time Constant ≥10 sec ≥10 sec
    Excitation Voltage 20 to 30 VDC 20 to 30 VDC
    Constant Current Excitation 2 to 20 mA 2 to 20 mA
    Output Impedance <100 Ohm <100 Ohm
    Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
    Physical
    Sensing Element Quartz Quartz
    Housing Material 17-4 Stainless Steel 17-4 Stainless Steel
    Diaphragm Invar Invar
    Sealing Epoxy Epoxy
    Electrical Connector BNC Jack BNC Jack
    Weight 1.55 lb 0.703 kg

    * All specifications are at room temperature unless otherwise specified.

    Accessories
    Supplied
    PCS-1AZ 0