sensor for miniature instrumented impulse hammer (086e80), 0 to 50 lbf

SENSOR FOR MINIATURE IMPULSE HAMMER

Model 086M112

Call for pricing.

  • CE
  • IP

Sensor for Miniature Instrumented Impulse Hammer (086E80), 0 to 50 lbf

  • Sensitivity: (±20%)100 mV/lbf (22.5 mV/N)
  • Measurement Range: 50 lbf pk (222 N pk)
  • Hammer Mass: 0.048 oz (1.36 gm)

Specification Notes

[1] Typical.
[2] Steel tip with no extender mass.
[1] Typical.
[3] See PCB Declaration of Conformance PS136 for details.

English: SI:
Performance
Sensitivity (±20 %) 100 mV/lbf 22.5 mV/N [2]
Measurement Range 50 lbf pk 222 N pk
Resonant Frequency ≥100 kHz ≥100 kHz
Non-Linearity ≤1 % ≤1 % [1]
Electrical
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance <100 Ohm <100 Ohm
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
Discharge Time Constant ≥100 sec ≥100 sec [1]
Physical
Sensing Element Quartz Quartz
Sealing Epoxy Epoxy
Hammer Mass 0.048 oz 1.36 gm
Head Diameter 0.25 in 6.3 mm
Tip Diameter 0.10 in 2.5 mm
Hammer Length 0.5 in 12.7 mm
Electrical Connection Position Side Side
Electrical Connector 5-44 Coaxial 5-44 Coaxial

* All specifications are at room temperature unless otherwise specified.

Accessories
Supplied
HCS-2 Calibration of Series 086B to 086D instrumented hammers only 1

Product Documents

Product Manual

Build Out Your Measurement Chain

002P10
Model: 002P10

General purpose coaxial cable, white FEP...

$68.50 USD

(Pricing valid only in the U.S.)

084A13
Model: 084A13

Extender mass, stainless steel, 0.250" d...

$11.00 USD

(Pricing valid only in the U.S.)

084A14
Model: 084A14

Plastic handle assembly (for Model 086E8...

$285.00 USD

(Pricing valid only in the U.S.)

084A17
Model: 084A17

Aluminum handle, 5-44 conn. (for Model 0...

$330.00 USD

(Pricing valid only in the U.S.)

084A28
Model: 084A28

Vinyl impact cap, red (for Model 086E80)

$5.00 USD

(Pricing valid only in the U.S.)

086E80
Model: 086E80

Miniature Instrumented Impulse Hammer, 0...

$1,760.00 USD

(Pricing valid only in the U.S.)