Model: 482C64

Add to Cart for Quote
Datasheet

4-channel, line-powered, ICP®/charge sensor signal cond., incremental gain, selectable charge conversion, TEDS, 10k LPF, RS-232, Ethernet

  • Frequency Range: (-5%) 0.05 to 75000 Hz
  • DC Power: +9 to +18 VDC

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Channels4 4  
Sensor Input Type(s)ICP®, Voltage, ChargeICP®, Voltage, Charge 
Voltage Gainx0.1 to x200 x0.1 to x200  
Voltage Gain Increment0.1 0.1  
Accuracy (Gain, x0.1 to x0.4)±5 %±5 % 
Accuracy (Gain, x0.5 to x200)±1 %±1 % 
Sensitivity (±1 %) (Charge Input @ 100 Hz)0.1 / 1.0 / 10.0 mV/pC0.1 / 1.0 / 10.0 mV/pC 
Insulation Resistance at Input(Minimum Required) (0.1 mV/pC)10 kohm10 kohm 
Insulation Resistance at Input (1.0 mV/pC)100 kohm100 kohm 
Insulation Resistance at Input (10.0 mV/pC)1 MOhm1 MOhm 
Input Range (Charge Input, Nominal)±100000 pC±100000 pC 
Output Range±10 Vpk±10 Vpk 
Frequency Range (-5 %) (x100 to x200 Gain)0.05 to 75000 Hz0.05 to 75000 Hz 
Frequency Range (-5 %) (x0.1 to x99.9 Gain)0.05 to 100000 Hz0.05 to 100000 Hz 
Low Frequency Response (-5 %) (Charge Input)0.5 Hz0.5 Hz[1] 
Electrical Filter Roll-off80 dB/decade80 dB/decade 
Filter Type (Fourth-order Butterworth)Low PassLow Pass 
Electrical Filter Corner Frequency (-3 dB)10 kHz10 kHz[2][3] 
Electrical Filter Roll-off24 dB/octave24 dB/octave 
Electrical Filter Pass Band Amplitude Accuracy1 %1 % 
Electrical Filter Stop Band Attenuation (Minimum)96 dB96 dB 
Phase Response (at 1 kHz)±1 °±1 ° 
Cross Talk (maximum)-72 dB-72 dB 
TEDS Sensor SupportYesYes 
Fault/Bias Monitor/Meter (LED)Open/Short/OverloadOpen/Short/Overload 
Linearity (Charge Input)±1 % FS±1 % FS 
Control Interface
Digital Control InterfaceRS-232RS-232 
Digital Control InterfaceEthernetEthernet 
Human InterfaceKeypadKeypad 
Display2 rows, 16 columns2 rows, 16 columns 
Digital Control: Data Rate19200 bps19200 bps 
Digital Control: Start, Data, Stop, Parity1, 8, 1, No1, 8, 1, No 
Digital Control: HandshakingRTS/CTSRTS/CTS 
Digital Control: Cable Length (Maximum)50 ft15.2 m 
Environmental
Temperature Range (Operating)+32 to +120 °F0 to +50 °C 
Electrical
Power Required (for supplied AC power adaptor)AC PowerAC Power 
Power Required (direct input to unit)DC PowerDC Power 
AC Power (50 to 60 Hz)100 to 240 VAC100 to 240 VAC 
AC Power1.6 Amps1.6 Amps 
DC Power+9 to +18 VDC+9 to +18 VDC 
DC Power≤2.5 Amps≤2.5 Amps 
Excitation Voltage (To Sensor)+24 VDC+24 VDC 
DC Offset≤50 mV≤50 mV 
Constant Current Excitation (To Sensor)0 to 20 mA0 to 20 mA[5] 
Output Impedance≤50 Ohm≤50 Ohm 
Discharge Time Constant (Charge Input)1.0 sec1.0 sec 
Broadband Electrical Noise (1 to 10000 Hz) (Gain x1)50 µV rms50 µV rms[4] 
Spectral Noise (1 Hz ) (Gain x1)8.0 µV/√Hz8.0 µV/√Hz[4] 
Spectral Noise (10 Hz ) (Gain x1)1.5 µV/√Hz1.5 µV/√Hz[4] 
Spectral Noise (100 Hz ) (Gain x1)1.0 µV/√Hz1.0 µV/√Hz[4] 
Spectral Noise (1 kHz ) (Gain x1)1.0 µV/√Hz1.0 µV/√Hz[4] 
Spectral Noise (10 kHz ) (Gain x1)1.0 µV/√Hz1.0 µV/√Hz[4] 
Broadband Electrical Noise (1 to 10000 Hz) (Gain x10)75 µV rms75 µV rms[4] 
Spectral Noise (1 Hz ) (Gain x10)20 µV/√Hz20 µV/√Hz[4] 
Spectral Noise (10 Hz ) (Gain x10)1.5 µV/√Hz1.5 µV/√Hz[4] 
Spectral Noise (100 Hz ) (Gain x10)1.0 µV/√Hz1.0 µV/√Hz[4] 
Spectral Noise (1 kHz ) (Gain x10)1.0 µV/√Hz1.0 µV/√Hz[4] 
Spectral Noise (10 kHz ) (Gain x10)1.0 µV/√Hz1.0 µV/√Hz[4] 
Broadband Electrical Noise (1 to 10000 Hz) (Gain x100)350 µV rms350 µV rms[4] 
Spectral Noise (1 Hz ) (Gain x100)100.0 µV/√Hz100.0 µV/√Hz[4] 
Spectral Noise (10 Hz ) (Gain x100)10.0 µV/√Hz10.0 µV/√Hz[4] 
Spectral Noise (100 Hz ) (Gain x100)8.0 µV/√Hz8.0 µV/√Hz[4] 
Spectral Noise (1 kHz ) (Gain x100)6.0 µV/√Hz6.0 µV/√Hz[4] 
Broadband Electrical Noise (1 to 10000 Hz) (0.1 mV/pC & Gain x1)52.0 µV/rms52.0 µV/rms[4] 
Spectral Noise (10 kHz ) (Gain x100)6.0 µV/√Hz6.0 µV/√Hz[4] 
Spectral Noise (1 Hz) (0.1 mV/pC & Gain x1)10.0 µV/√Hz10.0 µV/√Hz[4] 
Spectral Noise (10 Hz) (0.1 mV/pC & Gain x1)1.5 µV/√Hz1.5 µV/√Hz[4] 
Spectral Noise (100 Hz) (0.1 mV/pC & Gain x1)0.6 µV/√Hz0.6 µV/√Hz[4] 
Spectral Noise (1000 Hz) (0.1 mV/pC & Gain x1)0.6 µV/√Hz0.6 µV/√Hz[4] 
Spectral Noise (10000 Hz) (0.1 mV/pC & Gain x1)0.6 µV/√Hz0.6 µV/√Hz[4] 
Broadband Electrical Noise (1 to 10000 Hz) (1.0 mV/pC & Gain x1)52.0 µV rms52.0 µV rms[4] 
Spectral Noise (1 Hz) (1.0 mV/pC & Gain x1)14.0 µV/√Hz14.0 µV/√Hz[4] 
Spectral Noise (10 Hz) (1.0 mV/pC & Gain x1)2.0 µV/√Hz2.0 µV/√Hz[4] 
Spectral Noise (100 Hz) (1.0 mV/pC & Gain x1)0.7 µV/√Hz0.7 µV/√Hz[4] 
Spectral Noise (1000 Hz) (1.0 mV/pC & Gain x1)0.7 µV/√Hz0.7 µV/√Hz[4] 
Spectral Noise (10000 Hz) (1.0 mV/pC & Gain x1)0.7 µV/√Hz0.7 µV/√Hz[4] 
Broadband Electrical Noise (1 to 10000 Hz) (10.0 mV/pC & Gain x1)56.0 µV rms56.0 µV rms[4] 
Spectral Noise (1 Hz) (10.0 mV/pC & Gain x1)15.0 µV/√Hz15.0 µV/√Hz[4] 
Spectral Noise (10 Hz) (10.0 mV/pC & Gain x1)2.0 µV/√Hz2.0 µV/√Hz[4] 
Spectral Noise (100 Hz) (10.0 mV/pC & Gain x1)0.6 µV/√Hz0.6 µV/√Hz[4] 
Spectral Noise (1000 Hz) (10.0 mV/pC & Gain x1)0.6 µV/√Hz0.6 µV/√Hz[4] 
Spectral Noise (10000 Hz) (10.0 mV/pC & Gain x1)0.6 µV/√Hz0.6 µV/√Hz[4] 
Calibration Input (±1 %)±1000 pC/V±1000 pC/V 
Overload Threshold (±0.2 Vpk)+10 Vpk+10 Vpk 
Physical
Electrical Connector (ICP® Sensor Input)BNC JackBNC Jack 
Electrical Connector (Charge Sensor Input)BNC JackBNC Jack 
Electrical Connector (Output)BNC JackBNC Jack 
Electrical Connector (DC Power Input)6-socket mini DIN (female)6-socket mini DIN (female) 
Electrical Connector (Charge Calibration Input)BNC JackBNC Jack 
Electrical Connector (RS-232 Digital Control)DB-9 ConnectorDB-9 Connector 
Electrical Connector (Ethernet)RJ-45RJ-45[6] 
Size - Height3.2 in8.1 cm 
Size - Width8.0 in20 cm 
Size - Depth5.9 in15 cm 
Weight2.50 lb1134 gm 

All specifications are at room temperature unless otherwise specified.


CE

Product Notes
[1] The low frequency tolerance is accurate within ±20% of the specified frequency.
[2] Frequency tolerance is within ± 5% of the specified value.
[3] Contact factory for other available frequencies.
[4] Typical.
[5] User adjustable, factory set at 4 mA (± 1.0 mA). One control adjusts all channels.
[6] Auto sensing 10 base-T or 100 base-TX
[7] See PCB Declaration of Conformance PS024 for details.
Accessories:
Supplied
017AXXPower Cord(1)
100-7103-50(02711) Multi-conductor cable, 6-ft, 9-pin female to 9-pin male.(1)
488B14/NCPOWER CONVERTOR(1)
EE75PCB MCSC Control Software.(1)
Optional Versions:
No optional versions
Product Documents
Additional Downloads
PCB_MCSC Software, EE75_Installer.zipSoftware for signal conditioners - RS232 & Ethernet
Lantronix InstallerEthernet Address Tool