Model: 350B50

$2,025.00 USD
(Pricing valid in US only)

High amplitude, triaxial ICP® accel., 0.5 mV/g, 10k g range, w/built-in 2nd order low-pass filter (-3dB at 20 kHz)

  • Sensitivity: (±30%) 0.5 mV/g (0.05 mV/(m/s²))
  • Measurement Range: ±10000 g pk (±98000 m/s² pk)
  • Electrical Connector: Integral Cable

Add this product to my product comparison
Compare selected models ()

Sensitivity (±30 %)0.5 mV/g0.05 mV/(m/s²) 
Measurement Range±10000 g pk±98000 m/s² pk 
Frequency Range (±1 dB)3 to 10000 Hz3 to 10000 Hz 
Frequency Range (-3 dB)1.5 to 20000 Hz1.5 to 20000 Hz[3] 
Resonant Frequency≥60 kHz≥60 kHz 
Broadband Resolution (1 to 10000 Hz)0.03 g rms0.29 m/s² rms[2] 
Non-Linearity (per 1000 g (9810 m/s2))≤2 %≤2 %[1] 
Transverse Sensitivity≤5 %≤5 % 
Overload Limit (Shock)±25000 g pk±245000 m/s² pk 
Temperature Range (Operating)-65 to +250 °F-54 to +121 °C 
Temperature ResponseSee Graph %/°FSee Graph %/°F[2] 
Excitation Voltage18 to 30 VDC18 to 30 VDC 
Constant Current Excitation2 to 20 mA2 to 20 mA 
Output Impedance≤100 Ohm≤100 Ohm 
Output Bias Voltage8 to 12 VDC8 to 12 VDC 
Discharge Time Constant0.5 to 1.0 sec0.5 to 1.0 sec 
Settling Time (within 10% of bias)<5 sec<5 sec 
Electrical Isolation (Base)>100000000 Ohm>100000000 Ohm 
Sensing ElementCeramicCeramic 
Sensing GeometryShearShear 
Housing MaterialTitaniumTitanium 
Size - Height0.32 in8.2 mm 
Size - Length0.72 in18.3 mm 
Size - Width0.72 in18.3 mm 
Weight (without cable)0.3 oz8.0 gm[2] 
Electrical ConnectorIntegral CableIntegral Cable 
Electrical Connection PositionSideSide 
Cable Termination1/4-28 4-Pin Jack1/4-28 4-Pin Jack 
Cable Length5.0 ft1.52 m 
Cable Type034 4-cond Shielded034 4-cond Shielded 
MountingThrough HoleThrough Hole 

All specifications are at room temperature unless otherwise specified.


Product Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Electrical filter is a second order filter.
[4] See PCB Declaration of Conformance PS023 for details.
034G054-cond. shielded cable, 5 ft (1.5M), 4-pin plug to (3) BNC plugs(1)
080A197MOUNTING BASE FOR 350B50(1)
080B197Mounting Adaptor, through hole for 350B50(1)
ACS-14THigh G shock triaxial accelerometer calibration using Hopkinson bar(1)
ACS-22TNIST Traceable triaxial frequency response (100Hz to ±1 Db point(1)
081A112Insulated cap screw, 6-32 thd x 1/2" long (for Model 350B50)(4)
Optional Versions:
No optional versions
Product Documents
Additional Downloads None Listed