Model : 134A22 | PRESSURE SENSOR, ICP®

Click for lead times
tourmaline icp® pressure bar with 003 cable and inline source follower, 5000 psi, 1 mv/psi, 0.2 microsecond rise time
$ 2,975.00 USD
(Pricing valid in US only!)

Tourmaline ICP® pressure bar with 003 cable and inline source follower, 5000 psi, 1 mV/psi, 0.2 microsecond rise time

  • Measurement Range: 5 kpsi ( 34475 kPa)
  • Sensitivity: (±15%)1 mV/psi ( 0.145 mV/kPa)
  • Low Frequency Response: (-5%)1.7 Hz
  • Resonant Frequency: >=1500 kHz
  • Electrical Connector: 10-32 Coaxial Jack
  • Weight: 1.4 oz ( 39 gm)
English: SI:
Performance
Measurement Range (for ±5V output) 5 kpsi 34475 kPa
Useful Overrange (for ± 10V output) 10 kpsi 68950 kPa [ 2]
Sensitivity (±15 %) 1 mV/psi 0.145 mV/kPa [ 3]
Maximum Pressure 15 kpsi 103425 kPa
Resolution 100 mpsi 0.7 kPa
Resonant Frequency ≥1500 kHz ≥1500 kHz
Rise Time (Reflected) ≤0.2 µ sec ≤0.2 µ sec
Low Frequency Response (-5 %) 1.7 Hz 1.7 Hz
Non-Linearity ≤2 % FS ≤2 % FS [ 1]
Environmental
Temperature Range (Operating) -32 to +120 °F -36 to +49 °C
Maximum Flash Temperature ≤5000 °F ≤2760 °C
Electrical
Output Polarity (Positive Pressure) Positive Positive
Discharge Time Constant (at room temp) ≥0.3 sec ≥0.3 sec
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤100 Ohm ≤100 Ohm
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
Physical
Sensing Element Tourmaline Tourmaline
Housing Material Stainless Steel Stainless Steel
Diaphragm Epoxy Epoxy
Sealing Epoxy Epoxy
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Weight 1.4 oz 39 gm
* All specifications are at room temperature unless otherwise specified
.




Specification Notes


[ 1] Zero-based, least-squares, straight line method.
[ 2] For +10 volt output, minimum 24 VDC supply voltage required. Negative 10 volt output may be limited by output bias.
[ 3] Calibrated as a system using (3 inch) type 003 cable and 402A series in-line amplifier.
[ 4] See PCB Declaration of Conformance PS023 for details.


Accessories


Supplied
061A30 Spanner Wrench, 2-pin, for Series 134A and Model 132A36 1


Optional Versions


( M ) Metric Mount