PCB L&T Reaction Torque Transducer, 20k in-lb/1,667 ft-lb (2.3 kN-m) rated capacity, 50% static overload protection, 5-in (127 mm) Steel Flange
- Measurement Range: 20000 lbf-in
(2259 Nm)
- Sensitivity: (±15%)2 mV/V
(2 mV/V)
- Mounting: Flange (3/8in Bolts)
(Flange (M10 Bolts))
- Size - Diameter: 5.00 in
(127 mm)
- Size - Length: 3.50 in
(88.9 mm)
- Torsional Stiffness: 7500 klbf-in/radian
(847.4 kN-m/radian)
|
English: |
SI: |
|
| Performance |
| Measurement Range (Full Scale Capacity) |
20000 lbf-in |
2259 Nm |
[1]
|
| Sensitivity (±15 %) (output at rated capacity) |
2 mV/V |
2 mV/V |
[1]
[2]
|
| Non-Linearity |
≤0.1 % FS |
≤0.1 % FS |
[2]
|
| Hysteresis |
≤0.1 % FS |
≤0.1 % FS |
[2]
|
| Non-Repeatability |
≤0.02 % FS |
≤0.02 % FS |
[2]
|
| Resonant Frequency |
2200 Hz |
2200 Hz |
|
| Maximum Torque |
30000 lbf-in |
3390 Nm |
|
| Environmental |
| Overload Limit (Axial Thrust) |
20000 lbf |
88.96 kN |
[3]
|
| Overload Limit (Overhung Moment) |
10000 lbf-in |
1130 Nm |
[3]
|
| Overload Limit (Shear) |
10000 lbf |
44.48 kN |
[3]
|
| Temperature Range (Operating) |
-65 to +200 °F |
-54 to +93 °C |
|
| Temperature Range (Compensated) |
+70 to +170 °F |
+21 to +77 °C |
|
| Temperature Effect on Output (Maximum) |
±0.002 %Reading/°F |
±0.0036 %Reading/°C |
[4]
|
| Temperature Effect on Zero Balance (Maximum) |
±0.002 %FS/°F |
±0.0036 %FS/°C |
[2]
[4]
|
| Electrical |
| Bridge Resistance |
350 Ohm |
350 Ohm |
[1]
|
| Excitation Voltage (Recommended) |
10 VDC |
10 VDC |
[5]
|
| Insulation Resistance |
5 GOhm |
5 GOhm |
|
| Zero Balance |
≤1 %RO |
≤1 %RO |
|
| Output Polarity |
cw+ |
cw+ |
|
| Physical |
| Size - Diameter |
5.00 in |
127 mm |
[6]
|
| Size - Length |
3.50 in |
88.9 mm |
[6]
|
| Weight |
10 lb |
4536 g |
|
| Mounting |
Flange (3/8in Bolts) |
Flange (M10 Bolts) |
|
| Torsional Stiffness |
7500 klbf-in/radian |
847.4 kN-m/radian |
|
| Sensing Element |
Strain Gage |
Strain Gage |
|
| Housing Material (Sensor) |
Plated Steel |
Plated Steel |
|
| Electrical Connector |
PT02E-10-6P |
PT02E-10-6P |
|
* All specifications are at room temperature unless otherwise specified
.
Specification Notes
[1] Nominal.
[2] FS - Full Scale.
[3] Singularly applied, i.e. no other extraneous loads.
[4] Over compensated operating temperature range.
[1] Nominal.
[5] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[6] See Drawing 26440 for Complete Dimensions
Accessories
|
|
|
| Supplied |
| 181-012A |
Mating conn., 6-socket (F) w/strain relief for sensors with PT conn. |
1 |