Triaxial, lightweight miniature, ceramic shear ICP® accel., 1.0 mV/g, 0.25" cube, 5 ft. integral cable to 4-pin jack, no mating cable supplied
- Sensitivity:
(±20%)1 mV/g
(
0.10 mV/(m/s²))
- Measurement Range:
±5000 g pk
(
±49050 m/s² pk)
- Frequency Range:
(+/-10%)1 to 10000 Hz
(
1 to 10000 Hz)
- Electrical Connector:
Integral Cable
RELATED PRODUCTS
|
English: |
SI: |
|
| Performance |
| Sensitivity (±20 %) |
1 mV/g |
0.10 mV/(m/s²) |
|
| Measurement Range |
±5000 g pk |
±49050 m/s² pk |
|
| Frequency Range (+/-5 %) |
1.2 to 6000 Hz |
1.2 to 6000 Hz |
|
| Frequency Range (+/-10 %) |
1 to 10000 Hz |
1 to 10000 Hz |
|
| Resonant Frequency |
≥50 kHz |
≥50 kHz |
|
| Broadband Resolution (1) |
0.02 g rms |
0.2 m/s² rms |
[
2]
|
| Non-Linearity |
1 % |
1 % |
[
1]
|
| Transverse Sensitivity |
≤5 % |
≤5 % |
|
| Environmental |
| Overload Limit (Shock) |
±10000 g pk |
±98100 m/s² pk |
|
| Temperature Range (Operating) |
-65 to +325 °F |
-54 to +163 °C |
|
| Temperature Response |
See Graph %/°F |
See Graph %/°F |
[
2]
|
| Base Strain Sensitivity |
0.05 g/µε |
0.5 (m/s²)/µε |
[
2]
|
| Electrical |
| Excitation Voltage |
18 to 30 VDC |
18 to 30 VDC |
|
| Constant Current Excitation |
2 to 20 mA |
2 to 20 mA |
|
| Output Impedance |
≤100 Ohm |
≤100 Ohm |
|
| Output Bias Voltage |
8 to 12 VDC |
8 to 12 VDC |
|
| Discharge Time Constant |
0.4 to 1.2 sec |
0.4 to 1.2 sec |
|
| Settling Time (within 10% of bias) |
<3 sec |
<3 sec |
|
| Spectral Noise (1 Hz) |
4.7 mg/√Hz |
46 mm/s2/√Hz |
[
2]
|
| Spectral Noise (10 Hz) |
1.2 mg/√Hz |
11.8 mm/s2/√Hz |
[
2]
|
| Spectral Noise (100 Hz) |
0.48 mg/√Hz |
4.71 mm/s2/√Hz |
[
2]
|
| Spectral Noise (1 kHz) |
0.17 mg/√Hz |
1.67 mm/s2/√Hz |
[
2]
|
| Spectral Noise (10 kHz) |
0.13 mg/√Hz |
1.28 mm/s2/√Hz |
[
2]
|
| Physical |
| Sensing Element |
Ceramic |
Ceramic |
|
| Sensing Geometry |
Shear |
Shear |
|
| Housing Material |
Titanium |
Titanium |
|
| Sealing |
Hermetic |
Hermetic |
|
| Size - Height |
0.25 in |
6.35 mm |
|
| Size - Length |
0.25 in |
6.35 mm |
|
| Size - Width |
0.25 in |
6.35 mm |
|
| Weight (without cable) |
0.03 oz |
0.8 gm |
[
2]
|
| Electrical Connector |
Integral Cable |
Integral Cable |
|
| Electrical Connection Position |
Side |
Side |
|
| Cable Termination |
1/4-28 4-Pin Jack |
1/4-28 4-Pin Jack |
|
| Cable Length |
5 ft |
1.5 m |
|
| Cable Type |
019 4-cond Shielded |
019 4-cond Shielded |
|
| Mounting |
Adhesive |
Adhesive |
|
* All specifications are at room temperature unless otherwise specified
.
Specification Notes
[
1]
Zero-based, least-squares, straight line method.
[
2]
Typical.
[
3]
See PCB Declaration of Conformance PS023 for details.
Accessories
|
|
|
| Supplied |
| 034G05 |
4-conductor, low noise, shielded FEP cable, 5-ft, 4-socket plug to (3) BNC plugs (labeled X Y Z) |
1 |
| 080A109 |
Petro Wax, one square, 1" x 1" x 0.25" |
1 |
| 080A90 |
Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces) |
1 |
| ACS-1T |
Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable |
1 |
Product Documents
Product Downloads