platinum stock products; 4-channel, line-powered, icp® sensor signal cond., unity gain, bnc input/output conn.
platinum

Four-channel, ICP® Sensor Signal Conditioner

Model 482C05

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock Lead Times
13 Lead Time for 1-10 is 3 Wks.
Lead Time for 11-20 is 4 Wks.
  • CE
  • IP

Platinum Stock Products; 4-channel, line-powered, ICP® sensor signal cond., unity gain, BNC input/output conn.

  • DC Power: <0.25 Amps

Specification Notes


[1] With >= 1M ohm input impedance of readout device.
[2] Un-buffered output, read out device input impedance affects discharge time constant and low frequency response of unit.
[3] Typical.
[1] With >= 1M ohm input impedance of readout device.
[4] User adjustable, factory set at 4 mA (± 0.5 mA). One control adjusts all channels.
[2] Un-buffered output, read out device input impedance affects discharge time constant and low frequency response of unit.
[5] See PCB Declaration of Conformance PS024 for details.

English: SI:
Performance
Channels 4 4
Sensor Input Type(s) ICP® ICP®
Output Range (Maximum) ±10 V ±10 V
Low Frequency Response (-5 %) <0.1 Hz <0.1 Hz [1] [2]
High Frequency Response (-5 %) >1000 kHz >1000 kHz
Phase Response (at 1 kHz) ±1 ° ±1 °
Cross Talk (maximum) -72 dB -72 dB
Fault/Bias Monitor/Meter (LED) Open/Short/Overload Open/Short/Overload
Environmental
Temperature Range (Operating) +32 to +120 °F 0 to +50 °C
Electrical
Power Required (for supplied AC power adaptor) AC Power AC Power
Power Required (direct input to unit) DC Power DC Power
AC Power (47 to 63 Hz) 100 to 240 VAC 100 to 240 VAC
AC Power ≤0.7 Amps ≤0.7 Amps
DC Power <0.25 Amps <0.25 Amps
DC Power +32 to 38 VDC +32 to 38 VDC
Excitation Voltage (±1 VDC) (To Sensor) +26 VDC +26 VDC
DC Offset <20 mV <20 mV
Constant Current Excitation (To Sensor) 2 to 20 mA 2 to 20 mA [4]
Discharge Time Constant (0 to 50 %) >5 sec >5 sec [1] [2]
Broadband Electrical Noise (1 to 10000 Hz) 3.5 µV rms 3.5 µV rms [3]
Spectral Noise (1 Hz) 1.30 µV/√Hz 1.30 µV/√Hz [3]
Spectral Noise (10 Hz) 0.10 µV/√Hz 0.10 µV/√Hz [3]
Spectral Noise (100 Hz) 0.08 µV/√Hz 0.08 µV/√Hz [3]
Spectral Noise (1 kHz) 0.07 µV/√Hz 0.07 µV/√Hz [3]
Spectral Noise (10 kHz) 0.07 µV/√Hz 0.07 µV/√Hz [3]
Overload Threshold (±1.0 Vpk) ±10 Vpk ±10 Vpk
Physical
Electrical Connector (ICP® Sensor Input) BNC Jack BNC Jack
Electrical Connector (Output) BNC Jack BNC Jack
Electrical Connector (DC Power Input) 5-socket DIN (female) 5-socket DIN (female)
Size - Height 3.2 in 8.1 cm
Size - Width 8.0 in 20 cm
Size - Depth 5.9 in 15 cm
Weight 1.25 lb 567 gm

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
017AXX 1
488B04/NC Universal AC power adapter, 100-240 VAC/ 50-60 Hz input, 33 VDC output, 5-pin DIN (for models 482C05 and 482C15), no line cord 1