Model : 640B00 | 4-20 mA Output Velocity Sensor

Click for lead times
platinum stock products;industrial vibration sensor, 4 to 20 ma output, 0 to 0.5 in/sec pk, 3 to 1k hz, top exit, 2-pin conn.
$ 235.00 USD
(Pricing valid in US only!)
38 units in stock

Platinum Stock Products;Industrial vibration sensor, 4 to 20 mA output, 0 to 0.5 in/sec pk, 3 to 1k Hz, top exit, 2-pin conn.

  • Measurement Range: 0.0 to 0.5 in/sec pk ( 0.0 to 12.7 mm/s pk)
  • Output: 4-20 mA
  • Frequency Range: (±10%)180 to 60 kcpm ( 3 to 1 kHz)
  • Sensing Element: Ceramic
  • Weight: 4.7 oz ( 131 gm)

RELATED PRODUCTS



682A00
682A00

Enclosure, 10" x 8" x 6", NEMA-4X, for housing DIN rail mount modules includes 15 cord grips



Add to Cart for Quote
Add to Cart
682A06
682A06

DIN rail mount controller for use with universal inputs, 2 form A relays



Add to Cart for Quote
Add to Cart
682A10
682A10

Enclosure, 16"x14"x6", for housing DIN rail mount modules.



Add to Cart for Quote
Add to Cart
070A80
070A80

Detachable front panel display and programmer for Model 682A06 Universal Transmitter



Add to Cart for Quote
Add to Cart
M080A130
M080A130

Curved surface magnet, 19 mm diameter, 67 N, M6x1 threaded hole w/mounting stud



Add to Cart for Quote
Add to Quote
M081A61
M081A61

Mounting stud, 1/4-28 to M6x1 x 8.6 mm long, BeCu w/shoulder



Add to Cart for Quote
Add to Cart
508BQ010BZ
508BQ010BZ

10’ two-conductor, polyurethane-jacketed cable with two-socket, right-angle MIL-C-5015 connector on one end and blunt cut on the other end 508BQ010BZ



Add to Cart for Quote
Add to Cart
508BR010BZ
508BR010BZ

10’ two-conductor, polyurethane-jacketed cable with two-socket MIL-C-5015 connector on one end and blunt cut on the other end 508BR010BZ



Add to Cart for Quote
Add to Cart
English: SI:
Performance
Measurement Range 0.0 to 0.5 in/sec pk 0.0 to 12.7 mm/s pk [ 3]
Output 4-20 mA 4-20 mA
Frequency Range (±10 %) 180 to 60 kcpm 3 to 1 kHz [ 1] [ 2]
Broadband Resolution 0.005 in/sec pk 0.13 mm/s pk [ 4]
Non-Linearity ±1 % ±1 %
Environmental
Temperature Range -40 to 185 °F -40 to 85 °C
Enclosure Rating IP68 IP68
Electrical
Excitation Voltage 12 to 30 VDC 12 to 30 VDC
Load Resistance 50 (Vs-12) ohms 50 (Vs-12) ohms
Settling Time (within 2% of value) <15 sec <15 sec
Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm
Physical
Size - Hex 1.0 in 25.4 mm
Size - Height 2.6 in 66 mm
Weight 4.7 oz 131 gm
Mounting Thread 1/4-28 UNF No Metric Equivalent
Mounting Torque 3 to 5 ft-lb 4 to 7 Nm
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Stainless Steel Stainless Steel
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015
Electrical Connection Position Top Top
Electrical Connections (Pin A) 4-20 mA Pos (+) 4-20 mA Pos (+)
Electrical Connections (Pin B) 4-20 mA Neg (-) 4-20 mA Neg (-)
* All specifications are at room temperature unless otherwise specified
.




Specification Notes


[ 1] 1Hz = 60 cpm (cycles per minute).
[ 2] Current will fluctuate at frequencies below 5 Hz.
[ 3] Conversion Factor 1 in/sec = 0.0254 m/sec.
[ 4] Typical.
[ 5] See PCB Declaration of Conformance PS039 or PS053 for details.


Accessories


Supplied
081A40 Mounting stud, 1/4-28 x 0.438" long stainless steel screw with hex socket and brass tip 1
ICS-4 NIST-traceable single axis amplitude response cal from 0 to +10% freq. (for 4 to 20 mA sensors) 1


Optional Versions


( EX ) Hazardous Area Approval- contact factory for specific approvals


( RV ) Buffered Analog Signal Output - 100 mV/g (±20%)
English SI
Electrical Connector 3-Pin MIL-C-5015 3-Pin MIL-C-5015
Electrical Connections 4-20 mA Pos (+)
Electrical Connections 4-20 mA Neg/Signal Output Neg
Electrical Connections Signal Output Pos
Electrical Connector 3-Pin MIL-C-5015 3-Pin MIL-C-5015