triaxial, miniature (5 gm) high sensitivity icp® accel., 100 mv/g, 0.5 to 4k hz, titanium hsg, mini 4-pin conn., no supplied mating cable

Accelerometer, ICP®, Triaxial

Model 356A22/NC

  • CE
  • IP

Triaxial, miniature (5 gm) high sensitivity ICP® accel., 100 mV/g, 0.5 to 4k Hz, titanium hsg, mini 4-pin conn., no supplied mating cable

  • Sensitivity: (±10%)100 mV/g (10.2 mV/(m/s²))
  • Measurement Range: ±50 g pk (±491 m/s² pk)
  • Electrical Connector: 8-36 4-Pin

Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±10 %) 100 mV/g 10.2 mV/(m/s²)
Measurement Range ±50 g pk ±491 m/s² pk
Frequency Range (±5 %) 0.5 to 4000 Hz 0.5 to 4000 Hz
Frequency Range (±10 %) 0.4 to 5000 Hz 0.4 to 5000 Hz
Resonant Frequency ≥25 kHz ≥25 kHz
Broadband Resolution (1) 0.0002 g rms 0.002 m/s² rms [2]
Non-Linearity ≤1 % ≤1 % [1]
Transverse Sensitivity ≤5 % ≤5 %
Environmental
Overload Limit (Shock) ±5000 g pk ±49050 m/s² pk
Temperature Range (Operating) -65 to +170 °F -54 to +77 °C
Temperature Response See Graph %/°F See Graph %/°F [2]
Base Strain Sensitivity 0.001 g/µε 0.01 (m/s²)/µε [2]
Electrical
Excitation Voltage 18 to 30 VDC 18 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤200 Ohm ≤200 Ohm
Output Bias Voltage 8 to 12 VDC 8 to 12 VDC
Discharge Time Constant 1 to 3 sec 1 to 3 sec
Settling Time (within 10% of bias) <10 sec <10 sec
Spectral Noise (1 Hz) 50 µg/√Hz 490 (µm/sec2)/√Hz [2]
Spectral Noise (10 Hz) 20 µg/√Hz 196 (µm/sec2)/√Hz [2]
Spectral Noise (100 Hz) 5 µg/√Hz 49 (µm/sec2)/√Hz [2]
Spectral Noise (1 kHz) 2 µg/√Hz 19.8 (µm/sec2)/√Hz [2]
Spectral Noise (10 kHz) 1 µg/√Hz 9.8 (µm/sec2)/√Hz [2]
Physical
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Titanium Titanium
Sealing Hermetic Hermetic
Size - Height 0.45 in 11.4 mm
Size - Length 0.45 in 11.4 mm
Size - Width 0.45 in 11.4 mm
Weight (without cable) 0.19 oz 5.4 gm [2]
Electrical Connector 8-36 4-Pin 8-36 4-Pin
Electrical Connection Position Side Side
Mounting Thread 5-40 Female 5-40 Female
Mounting Torque 4 to 5 45 to 55

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories


Supplied
034K10 4-conductor, low noise, shielded FEP cable, 10-ft, mini 4-socket plug to (3) BNC plugs (labeled X, Y, Z) 1
080A Adhesive mtg base, 0.5" hex x 0.187" thk, 10-32 tapped hole, aluminum w/isolation hardcoat finish 1
080A109 Petro Wax, one square, 1" x 1" x 0.25" 1
081A27 Mounting stud, 5-40 to 5-40 thds, w/o shoulder, BeCu 1
081A90 Mounting stud, 10-32 to 5-40 1
ACS-1T Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable 1
M081A27 Metric mtg stud, 5-40 to M3 x 0.50 long 1

Optional Versions


(A) Adhesive Mount
Accessories:
Supplied 080A90 Quick Bonding Gel 1
Supplied 080A109 Petro Wax 1

(J) Ground Isolated

English SI
Electrical Isolation 100000000
Size - Height 0.49 12.5
Size - Length 0.45 11.4
Size - Width 0.49 12.5
Weight 0.23 6.5
Mounting Adhesive

Build Out Your Measurement Chain