multi-purpose icp® force sensor, 10 lb comp., 10 lb tension, 500 mv/lb, axial conn.

Force Sensor, ICP®

Model 208A11

  • CE
  • IP

Multi-purpose ICP® force sensor, 10 lb comp., 10 lb tension, 500 mV/lb, axial conn.

  • Measurement Range: 10 lb (0.04448 kN)
  • Sensitivity: (±15%)500 mV/lb (112404 mV/kN)
  • Low Frequency Response: (-5%)0.01 Hz
  • Upper Frequency Limit: 36000 Hz
  • Temperature Range: -65 to +250 °F (-54 to +121 °C)

Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[5] Sensor contains protected electronics which may cause long 'turn-on" times.
[2] Typical.
[6] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±15 %) 500 mV/lb 112404 mV/kN
Measurement Range (Compression) 10 lb 0.04448 kN
Measurement Range (Tension) 10 lb 0.04448 kN
Maximum Static Force (Compression) 60 lb 0.270 kN
Maximum Static Force (Tension) 60 lb 0.270 kN
Broadband Resolution (1) 0.0001 lb-rms 0.0004448 N-rms [2]
Low Frequency Response (-5 %) 0.01 Hz 0.01 Hz [3]
Upper Frequency Limit 36000 Hz 36000 Hz [4]
Non-Linearity ≤1 % FS ≤1 % FS [1]
Environmental
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Coefficient of Sensitivity ≤0.05 %/°F ≤0.09 %/°C
Electrical
Discharge Time Constant (at room temp) ≥50 sec ≥50 sec
Excitation Voltage 18 to 30 VDC 18 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤100 Ohm ≤100 Ohm
Output Bias Voltage 8 to 12 VDC 8 to 12 VDC [5]
Output Polarity (Compression) Positive Positive
Physical
Stiffness 6 lb/µin 1.05 kN/µm [2]
Size - Hex 0.625 in 15.88 mm
Size - Height 1.17 in 29.7 mm
Weight 0.80 oz 22.7 gm
Housing Material Stainless Steel Stainless Steel
Sealing Epoxy Epoxy
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Electrical Connection Position Axial Axial

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
080A81 Thread lock adhesive (for Series 200) 1
081B05 Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder 1
084A03 Impact cap, convex (for Series 208) 1
M081A62 Mounting stud, 10-32 to M6x1x 8.3 mm long, BeCu 1

Optional Versions


(W) Water Resistant Cable

English SI
Electrical Connector Sealed Cable

Build Out Your Measurement Chain