multi-purpose icp® force sensor, 500 lb comp. 500 lb tension, 10 mv/lb, axial conn.

Force Sensor, ICP®

Model 208A13

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock Lead Times
More on the way Call for Lead Time
  • CE
  • IP

Multi-purpose ICP® force sensor, 500 lb comp. 500 lb tension, 10 mV/lb, axial conn.

  • Measurement Range: 500 lb (2.224 kN)
  • Sensitivity: (±15%)10 mV/lb (2248 mV/kN)
  • Low Frequency Response: (-5%)0.0003 Hz
  • Upper Frequency Limit: 36000 Hz
  • Temperature Range: -65 to +250 °F (-54 to +121 °C)

Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[2] Typical.
[5] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±15 %) 10 mV/lb 2248 mV/kN
Measurement Range (Compression) 500 lb 2.224 kN
Measurement Range (Tension) 500 lb 2.224 kN
Maximum Static Force (Compression) 3000 lb 13.5 kN
Maximum Static Force (Tension) 750 lb 3.336 kN
Broadband Resolution (1) 0.005 lb-rms 0.02224 N-rms [2]
Low Frequency Response (-5 %) 0.0003 Hz 0.0003 Hz [3]
Upper Frequency Limit 36000 Hz 36000 Hz [4]
Non-Linearity ≤1 % FS ≤1 % FS [1]
Environmental
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Coefficient of Sensitivity ≤0.05 %/°F ≤0.09 %/°C
Electrical
Discharge Time Constant (at room temp) ≥2000 sec ≥2000 sec
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤100 Ohm ≤100 Ohm
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
Output Polarity (Compression) Positive Positive
Physical
Stiffness 6 lb/µin 1.05 kN/µm [2]
Size - Hex 0.625 in 15.88 mm
Size - Height 1.17 in 29.7 mm
Weight 0.80 oz 22.7 gm
Housing Material Stainless Steel Stainless Steel
Sealing Epoxy Epoxy
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Electrical Connection Position Axial Axial

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
080A81 Thread lock adhesive (for Series 200) 1
081B05 Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder 1
084A03 Impact cap, convex (for Series 208) 1
M081A62 Mounting stud, 10-32 to M6x1x 8.3 mm long, BeCu 1

Optional Versions


(W) Water Resistant Cable

English SI
Electrical Connector Sealed Cable

Build Out Your Measurement Chain