Model 394C06 Product Type: Shaker, Calibrator, Calibrator, Vibration Handheld shaker, 1g at 159.2 Hz (for up to 210 grams total weight of sensor, cable and mtg. accessories). View Spec Sheet (PDF) View photo and drawing .
PERFORMANCE ENGLISH SI Operating Frequency(± 1 %) 159.2 Hz 159.2 Hz Acceleration Output(± 3 %) 1.00 g rms 9.81 m/s² rms [6] Velocity Output 0.39 in/sec rms 9.81 mm/s rms [7] Displacement Output 0.39 mil rms 9.81 µm rms [7] Transverse Output ≤ 3 % ≤ 3 % Distortion(0 to 100 grams load) ≤ 2 % ≤ 2 % Distortion(100 to 210 grams load) ≤ 3 % ≤ 3 % Maximum Load 7.4 oz 210 gm [8] Automatic Switch Off Time 1.0 to 2.5 minutes 1.0 to 2.5 minutes [9] Calibration Cycles(2 gram load) 320 cycles 320 cycles [5] Calibration Cycles(25 gram load) 600 cycles 600 cycles [5] Calibration Cycles(50 gram load) 1600 cycles 1600 cycles [5] Calibration Cycles(100 gram load) 400 cycles 400 cycles [5] Calibration Cycles(150 gram load) 160 cycles 160 cycles [5] Calibration Cycles(210 gram load) 80 cycles 80 cycles [5] ENVIRONMENTAL Temperature Range(Operating) +15 to +130 °F -10 to +55 °C ELECTRICAL Ramp-Up time ≤ 3 sec ≤ 3 sec [1] Internal Battery(Quantity) 4 4 Internal Battery(Type) AA AA [2] DC Power 10 VDC 10 VDC [3] DC Power 2.4 amps 2.4 amps [4][3] Battery Life(2 gram load) 8 hours 8 hours [5] Battery Life(25 gram load) 15 hours 15 hours [5] Battery Life(50 gram load) 40 hours 40 hours [5] Battery Life(100 gram load) 10 hours 10 hours [5] Battery Life(150 gram load) 4 hours 4 hours [5] Battery Life(210 gram load) 2 hours 2 hours [5] PHYSICAL Size (Diameter x Height) 2.2 in x 7.8 in 56 mm x 200 mm Weight(with batteries) 31 oz 900 gm [1] Mounting Thread 10-32 Female 10-32 Female [10][11] Mounting Torque(Maximum) 10 in-lb 112 N-cm [11] SUPPLIED ACCESSORIES: Model 073A15 Battery Pack (1) Model 080A109 Petro Wax (1) Model 080A84 Mounting Base (5-40 to 10-32) (1) Model 080A85 Mounting Base (M3 X 0.5 to 10-32) (1) Model 081A08 Mounting Stud (10-32 to 1/4-28) (1) Model 081B05 Mounting Stud (10-32 to 10-32) (2) Model M081B05 Mounting Stud 10-32 to M6 X 0.75 (1) Model M081B23 Metric mounting stud, 10-32 to M5 x 0.80 long (1) OPTIONAL ACCESSORIES: Model 073A16 DC switching power supply (for Model 394C06) (1) Model 080A150 Mounting Base (1/4-28) (1) Model 080B44 3-Pin Mounting Adapter (1) OPTIONAL VERSIONS M- Metric Mount Acceleration Output(± 3 %) 1.02 g rms 10.0 m/s² rms All specifications are at room temperature unless otherwise specified. NOTES: [1] Typical. [2] Alkaline type recommended for longest service life. [3] This specification for external DC power supply (optional). [4] Maximum. [5] Approximate values, based on automatic switch off time and dependent on type of batteries. [6] Unit supplied set to rms; see manual for peak selection. [7] Calculated values for reference only. [8] Maximum load includes sensor, connector and cabling. [9] Unit supplied set to auto shut off; see manual for continuous use selection. [10] Test sensor should be hand tightened (without tools). [11] Transducer to shaker table. [12] See PCB Declaration of Conformance PS022 for details. [12]
Download Drawing 081-XXXX-90-P.pdf
Download Drawing 5746-C.pdf
Top