PCB Piezotronics, Inc.

800-828-8840

Announcing our NEW Lifetime Warranty Plus  
 
  Search Help   
Aerospace & Defense DivisionAutomotive Sensors DivisionEnvironmental Noise & Industrial HygieneIndustrial Vibration MonitoringPower GenerationTest & Measurement
 
Home  |  Products  |  Offices & Distributors  |  Events   Contact Us  |  Feedback
Search    Search within results  Search Help New Products
  Products » Accelerometer » MEMS
Product Results: 28 matching products, refine your list below or search within results above.
Browse by
Application
Array
Calibration Reference
Condition Monitoring
Cryogenics
ESS
Extreme Environment
Fuze
General Purpose
HALT
HASS
High Frequency
High Resolution
High Sensitivity
High Temperature
Human Vibration
Industrial
Low Cost
Low Frequency
Modal Analysis
Predictive Maintenance
Ride Comfort
Route Based
Safe and Arm
Seismic
Shock
Static Acceleration
Structural Testing
Ultra High Frequency
Technology
4-20 mA
Charge Output (PE)
Differential Output
ICP (IEPE)
MEMS
Piezoelectric
Piezoresistive
RAD Hard
Single Ended Output
TEDS
Configuration
3-Wire
Back-to-Back
Biaxial
Case Isolated
Ground Isolated
Kit
Low Profile
Miniature
Single Axis
Through Hole Mount
Triaxial
Model 3501A1220KG
Product Manual (575kb)
MEMS shock accelerometer, 20 kg, 1/4-28 stud mount, 034 integral cable (side exit), length 10-ft pigtails
  • Sensitivity: (±50%) (at 10 VDC excitation) 0.010 mV/g (0.001 mV/(m/s²))
  • Measurement Range: ±20000 g (±196100 m/s² pk)
  • Frequency Range: (1dB) 0 to 10000 Hz
  • Sensing Geometry: Full Active
  • Mounting: Integral Stud
  • Weight: (without cable) 0.088 oz (2.5 gm)
  • Model 3501A1320KG
    Product Manual (477kb)
    MEMS shock accelerometer, 20 kg, 1/4-28 stud mount, 034 integral cable (top exit), length 10-ft pigtails
  • Sensitivity: (±50%) (at 10 VDC excitation) 0.010 mV/g (0.001 mV/(m/s²))
  • Measurement Range: ±0 to 20000 g (±0 to 196100 m/s² pk)
  • Frequency Range: (1dB) 0 to 10000 Hz
  • Sensing Geometry: Full Active
  • Mounting: Integral Stud
  • Weight: (without cable) 0.088 oz (2.5 gm)
  • Model 3501A2020KG
    Product Manual (576kb)
    Shock accelerometer, 20 kg, sensor installed in chip carrier (SMT)
  • Sensitivity: (±50%) (at 10 VDC excitation) 0.010 mV/g (0.001 mV/(m/s²))
  • Measurement Range: ±20000 g (±196100 m/s² pk)
  • Frequency Range: (1dB) 0 to 10000 Hz
  • Sensing Geometry: Full Active
  • Mounting: Surface Mount
  • Weight: 0.005 oz (0.15 gm)
  • Model 3601A11
    Product Manual (654kb)
    20k g crash sensor, horizontal orientation
  • Sensitivity: (±50%) (at 10 VDC excitation) 0.010 mV/g (0.001 mV/(m/s²))
  • Measurement Range: ±0 to 20000 g (±0 to 196100 m/s² pk)
  • Frequency Range: (1dB) 0 to 10000 Hz
  • Sensing Geometry: Full Active
  • Mounting: Through Holes (2)
  • Weight: (without cable) .064 oz (1.81 gm)
  • Model 3711B03
    Product Manual (723kb)
    DC accelerometer, 2.5V offset, 66.6 mV/g, +/- 30g, +10 to 30 VDC excitation, 4-Pin, 1/4 28
  • Sensitivity: (±5%) 66.7 mV/g (6.80 mV/(m/s²))
  • Measurement Range: ±30 g pk (±294.2 m/s² pk)
  • Broadband Resolution: (0.5 to 100 Hz) 2.4 mg rms (0.024 m/s² rms)
  • Temperature Range: (Operating) -65 to +250 °F (-54.0 to +121 °C)
  • Frequency Range: (±3dB) 0 to 50 Hz
  • Electrical Connector: 4-Pin
  • Model 3711B1110G
    Product Manual (722kb)
    MEMS DC accelerometer, 200 mV/g +/-10 g range, 0 to 1000 Hz, 4-pin connector
  • Sensitivity: (±5%) 200 mV/g (20.4 mV/(m/s²))
  • Measurement Range: ±10 g pk (±98.1 m/s² pk)
  • Broadband Resolution: (0.5 to 100 Hz) 1.2 mg rms (0.012 m/s² rms)
  • Temperature Range: (Operating) -65 to +250 °F (-54.0 to +121 °C)
  • Frequency Range: (±5%) 0 to 1.0 kHz
  • Electrical Connector: 4-Pin
  • Model 3711B11200G
    Product Manual (715kb)
    MEMS DC accelerometer, 10 mV/g, +/-200 g range, 0 to 1000 Hz, 4-pin connector
  • Sensitivity: (±10%) 10 mV/g (1.02 mV/(m/s²))
  • Measurement Range: ±200 g pk (±1960 m/s² pk)
  • Broadband Resolution: (0.5 to 100 Hz) 21.1 mg rms (.21 m/s² rms)
  • Temperature Range: (Operating) -65 to +250 °F (-54.0 to +121 °C)
  • Frequency Range: (±5%) 0 to 850 Hz
  • Electrical Connector: 4-Pin
  • Model 3711B112G
    Product Manual (715kb)
    MEMS DC accelerometer, 1000 mV/g, +/-2 g range, 0 to 100 Hz, 4-pin connector
  • Sensitivity: (±5%) 1000 mV/g (101.9 mV/(m/s²))
  • Measurement Range: ±2 g pk (±19.6 m/s² pk)
  • Broadband Resolution: (0.5 to 100 Hz) 0.25 mg rms (0.0025 m/s² rms)
  • Temperature Range: (Operating) -65 to +250 °F (-54.0 to +121 °C)
  • Frequency Range: (±5%) 0 to 250 Hz
  • Electrical Connector: 4-Pin
  • Model 3711B1130G
    Product Manual (716kb)
    MEMS DC accelerometer, 67 mV/g, +/-30 g range, 0 to 1000 Hz, 4-pin connector
  • Sensitivity: (±5%) 66.7 mV/g (6.80 mV/(m/s²))
  • Measurement Range: ±30 g pk (±294.2 m/s² pk)
  • Broadband Resolution: (0.5 to 100 Hz) 3.5 mg rms (.034 m/s² rms)
  • Temperature Range: (Operating) -65 to +250 °F (-54.0 to +121 °C)
  • Frequency Range: (±5%) 0 to 1.0 kHz
  • Electrical Connector: 4-Pin
  • Model 3711B1150G
    Product Manual (838kb)
    MEMS DC accelerometer, 40 mV/g, +/-50 g range, 0 to 1000 Hz, 4-pin connector
  • Sensitivity: (±5%) 40 mV/g (4.1 mV/(m/s²))
  • Measurement Range: ±50 g pk (±490 m/s² pk)
  • Broadband Resolution: (0.5 to 100 Hz) 6.0 mg rms (0.06 m/s² rms)
  • Temperature Range: (Operating) -65 to +250 °F (-54.0 to +121 °C)
  • Frequency Range: (±5%) 0 to 1.0 kHz
  • Electrical Connector: 4-Pin
  • Result Page:  1  2  3       Next
    About PCB  |  No Risk Policy  |  Links Call Us 1-800-828-8840 or +1-716-684-0001