Log In

Log In

Need an Account? Start Here

 

Model: M207C

$2,450.00 USD
(Pricing valid in US only)


ICP® quartz force ring, 100k lb comp., 0.05 mV/lb, Metric

  • Measurement Range: 100000 lb (444.8 kN)
  • Sensitivity: (±15%) 0.05 mV/lb (11.24 mV/kN)
  • Low Frequency Response: (-5%) 0.0003 Hz
  • Upper Frequency Limit: 35000 Hz
  • Temperature Range: -65 to +250 °F (-54 to +121 °C)

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Sensitivity (±15 %)0.05 mV/lb11.24 mV/kN 
Measurement Range (Compression)100000 lb444.8 kN 
Maximum Static Force (Compression)110000 lb489.3 kN 
Broadband Resolution (1 to 10000 Hz)2.0 lb-rms8.9 N-rms[1] 
Low Frequency Response (-5 %)0.0003 Hz0.0003 Hz[3] 
Upper Frequency Limit35000 Hz35000 Hz[4] 
Non-Linearity≤1 % FS≤1 % FS[2] 
Environmental
Temperature Range-65 to +250 °F-54 to +121 °C 
Temperature Coefficient of Sensitivity≤0.12 %/°F≤0.216 %/°C 
Electrical
Discharge Time Constant (at room temp)≥2000 sec≥2000 sec 
Excitation Voltage20 to 30 VDC20 to 30 VDC 
Constant Current Excitation2 to 20 mA2 to 20 mA 
Output Impedance≤100 Ohm≤100 Ohm 
Output Bias Voltage8 to 14 VDC8 to 14 VDC 
Spectral Noise (1 Hz) (1)0.0524 lb/√Hz0.23 N/√Hz[1] 
Spectral Noise (10 Hz) (10)0.0230 lb/√Hz0.10 N√Hz[1] 
Spectral Noise (100 Hz) (100)0.00854 lb/√Hz0.0381 N/√Hz[1] 
Spectral Noise (1000 Hz) (1)0.00214 lb/√Hz0.00955 N/√Hz[1] 
Output Polarity (Compression)PositivePositive 
Physical
Preload33750 lb150.13 kN 
Stiffness131 lb/µin23 kN/µm[1] 
Size - Diameter2.950 in74.9 mm 
Size - Height0.670 in17.02 mm 
Size - Bolt Diameter1.5 in36 mm 
Size - ID (Hole Diameter)1.610 in40 mm 
Size - OD (Sensor)2.950 in74.9 mm 
Size - Sensing Surface2.660 in67.6 mm 
Weight11.57 oz328 gm 
Housing MaterialStainless SteelStainless Steel 
SealingHermeticHermetic 
Electrical Connector10-32 Coaxial Jack10-32 Coaxial Jack 
Electrical Connection PositionSideSide 

All specifications are at room temperature unless otherwise specified.


CE

Product Notes
[1] Typical.
[2] Zero-based, least-squares, straight line method.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[5] See PCB Declaration of Conformance PS023 for details.
Accessories:
Supplied
080A82Assembly Lubricant(1)
081A17Mounting Stud, 1 1/8-12 x 2.280, BeCu(1)
082B07Anti-friction washer (for Models 207C and 217B)(1)
083B07Pilot bushing (for Models 207C and 217B)(1)
Optional Versions:
(M) Metric Mount
 ENGLISHSI
Accessories:
    M081A17Mounting Stud, M30 x 2.00 x 2.280, BeCu(1)
    M083B07Pilot Bushing(1)
    M081A17Mounting Stud, M30 x 2.00 x 2.280, BeCu(1)
    M083B07Pilot Bushing(1)
(N) Negative Output Polarity
 ENGLISHSI
(W) Water Resistant Cable
 ENGLISHSI
    Electrical ConnectorSealed Cable
    Electrical Connection PositionSide
Product Documents
Additional Downloads