Log In

Log In

Need an Account? Start Here


Model: 607A62

$442.00 USD
(Pricing valid in US only)

Low profile industrial ICP® accel, 500 mV/g, 0.5 to 3k Hz, side exit, armored jacketed cable & swiveler base

  • Sensitivity: (±20%) 500 mV/g (51.0 mV/(m/s²))
  • Frequency Range: (±3dB) 30 to 180000 cpm (0.5 to 3000 Hz)
  • Sensing Element: Ceramic
  • Measurement Range: ±10 g (±98 m/s²)
  • Weight: 1.1 oz (31 gm)

Add this product to my product comparison
Compare selected models ()

Sensitivity (±20 %)500 mV/g51.0 mV/(m/s²)[1] 
Measurement Range±10 g±98 m/s² 
Frequency Range (±3 dB)30 to 180000 cpm0.5 to 3000 Hz[4] 
Resonant Frequency1500 kcpm25 kHz[2] 
Broadband Resolution (1 to 10000 Hz)300 µg2943 µm/sec2[2] 
Non-Linearity±1 %±1 %[3] 
Transverse Sensitivity≤7 %≤7 % 
Overload Limit (Shock)5000 g pk49050 m/s² pk 
Temperature Range-65 to +200 °F-54 to +93 °C 
Temperature ResponseSee Graph %/°FSee Graph %/°F[2] 
Enclosure RatingIP68IP68 
Settling Time (within 1% of bias)≤5.0 sec≤5.0 sec 
Discharge Time Constant≥0.3 sec≥0.3 sec 
Excitation Voltage18 to 28 VDC18 to 28 VDC 
Constant Current Excitation2 to 20 mA2 to 20 mA 
Output Impedance<500 Ohm<500 Ohm 
Output Bias Voltage8 to 12 VDC8 to 12 VDC 
Spectral Noise (10 Hz)8 µg/√Hz78.5 (µm/sec2)/√Hz[2] 
Spectral Noise (100 Hz)3 µg/√Hz29.4 (µm/sec2)/√Hz[2] 
Spectral Noise (1 kHz)3 µg/√Hz29.4 (µm/sec2)/√Hz[2] 
Electrical Isolation (Case)>100000000 Ohm>100000000 Ohm 
Size - Hex9/16 in14 mm 
Size - Height0.97 in24.6 mm 
Weight (without cable)1.1 oz31 gm[2] 
Mounting Torque7 to 8 ft-lb9.5 to 10.8 Nm[6][7] 
Mounting Torque2 to 5 ft-lb2.7 to 6.8 Nm 
Sensing ElementCeramicCeramic 
Sensing GeometryShearShear 
Housing MaterialStainless SteelStainless Steel 
SealingWelded HermeticWelded Hermetic 
Electrical ConnectorIntegral Armored CableIntegral Armored Cable 
Electrical Connection PositionSideSide 
Cable TerminationBlunt cutBlunt cut 
Cable Length10 ft3.0 m 
Cable TypePolyurethanePolyurethane[5] 

All specifications are at room temperature unless otherwise specified.


Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Typical.
[3] Zero-based, least-squares, straight line method.
[4] The high frequency tolerance is accurate within ±10% of the specified frequency.
[5] Twisted shielded pair.
[6] 1/8" hex Allen key required for English version, 3mm hex Allen key required for metric version.
[7] Stud torque must exceed sensor hex nut torque to ensure proper dismantling.
[8] See PCB Declaration of Conformance PS023 for details.
080A156Mounting Base(1)
ICS-2NIST-traceable single-point amplitude response calibration at 6000 cpm (100 Hz) for each axis(1)
Optional Versions:
(EX) Hazardous Area Approval- contact factory for specific approvals
(M) Metric Mount
    M080A159AAccessory for IMI Sensors Product(1)