Log In

Log In

Need an Account? Start Here

 

Model: 2302-02A_TCS-2B

Add to Cart for Quote

PCB L&T Reaction Torque Transducer, 20k in-lb/1,667 ft-lb (2.3 kN-m) rated capacity, 50% static overload protection, 5-in (127 mm) Steel Flange with system cal

  • Measurement Range: 20000 lbf-in (2259 Nm)
  • Sensitivity: (±15%) 2 mV/V (2 mV/V)
  • Mounting: Flange (3/8in Bolts) (Flange (M10 Bolts))
  • Size - Diameter: 5.00 in (127 mm)
  • Size - Length: 3.50 in (88.9 mm)

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Measurement Range (Full Scale Capacity)20000 lbf-in2259 Nm[1] 
Sensitivity (±15 %) (output at rated capacity)2 mV/V2 mV/V[2][1] 
Non-Linearity≤0.1 % FS≤0.1 % FS[2] 
Hysteresis≤0.1 % FS≤0.1 % FS[2] 
Non-Repeatability≤0.02 % FS≤0.02 % FS[2] 
Resonant Frequency2200 Hz2200 Hz 
Maximum Torque30000 lbf-in3390 Nm 
Environmental
Overload Limit (Axial Thrust)20000 lbf88.96 kN[4] 
Overload Limit (Overhung Moment)10000 lbf-in1130 Nm[4] 
Overload Limit (Shear)10000 lbf44.48 kN[4] 
Temperature Range (Operating)-65 to +200 °F-54 to +93 °C 
Temperature Range (Compensated)+70 to +170 °F+21 to +77 °C 
Temperature Effect on Output (Maximum)±0.002 %Reading/°F±0.0036 %Reading/°C[3] 
Temperature Effect on Zero Balance (Maximum)±0.002 %FS/°F±0.0036 %FS/°C[2][3] 
Electrical
Bridge Resistance350 Ohm350 Ohm[1] 
Excitation Voltage (Recommended)10 VDC10 VDC[5] 
Insulation Resistance5 GOhm5 GOhm 
Zero Balance≤1 %RO≤1 %RO 
Output Polaritycw+cw+ 
Physical
Size - Diameter5.00 in127 mm[6] 
Size - Length3.50 in88.9 mm[6] 
Weight10 lb4536 g 
MountingFlange (3/8in Bolts)Flange (M10 Bolts) 
Torsional Stiffness7500 klbf-in/radian847.4 kN-m/radian 
Sensing ElementStrain GageStrain Gage 
Housing Material (Sensor)Plated SteelPlated Steel 
Electrical ConnectorPT02E-10-6PPT02E-10-6P 

All specifications are at room temperature unless otherwise specified.


CE

Product Notes
[1] Nominal.
[2] FS - Full Scale.
[3] Over compensated operating temperature range.
[4] Singularly applied, i.e. no other extraneous loads.
[5] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[6] See Drawing 26440 for Complete Dimensions
Accessories:
Supplied
181-012APT06A-10-6S(SR)(1)
Optional Versions:
No optional versions
Product Documents
Additional Downloads