Log In

Log In

Need an Account? Start Here

 

Model: 209C11

Add to Cart for Quote

Miniature ICP® force sensor, 1 sec DTC, 2.2 lb comp., 1 lb tension, 2200 mV/lb

  • Measurement Range: 2.2 lb (0.00979 kN)
  • Sensitivity: (±15%) 2200 mV/lb (494604 mV/kN)
  • Low Frequency Response: (-5%) 0.5 Hz
  • Upper Frequency Limit: 30000 Hz
  • Temperature Range: -65 to +250 °F (-54 to +121 °C)
  • Mounting Thread: 10-32 Female (No Metric Equivalent)

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Sensitivity (±15 %)2200 mV/lb494604 mV/kN 
Measurement Range (Compression)2.2 lb0.00979 kN 
Measurement Range (Tension)1.0 lb0.00445 kN 
Maximum Static Force (Compression)11 lb0.0489 kN 
Maximum Static Force (Tension)1.0 lb0.00445 kN 
Broadband Resolution (1 to 10000 Hz)0.00002 lb-rms0.00009 N-rms[1] 
Low Frequency Response (-5 %)0.5 Hz0.5 Hz[2] 
Upper Frequency Limit30000 Hz30000 Hz[3] 
Environmental
Temperature Range-65 to +250 °F-54 to +121 °C 
Temperature Coefficient of Sensitivity≤0.05 %/°F≤0.09 %/°C 
Electrical
Discharge Time Constant (at room temp)≥1 sec≥1 sec 
Excitation Voltage18 to 30 VDC18 to 30 VDC 
Constant Current Excitation2 to 20 mA2 to 20 mA 
Output Impedance≤100 Ohm≤100 Ohm 
Output Bias Voltage8 to 12 VDC8 to 12 VDC 
Spectral Noise (1 Hz)0.00000442 lb/√Hz0.0000197 N/√Hz[1] 
Spectral Noise (10 Hz)0.000000464 lb/√Hz0.00000207 N√Hz[1] 
Spectral Noise (100 Hz)0.00000013 lb/√Hz0.00000058 N/√Hz[1] 
Spectral Noise (1000 Hz)0.0000000481 lb/√Hz0.000000215 N/√Hz[1] 
Output Polarity (Compression)PositivePositive 
Physical
Stiffness2 lb/µin0.35 kN/µm[1] 
Size - Hex0.375 in9.53 mm 
Size - Height0.83 in21.08 mm 
Weight0.29 oz8.2 gm 
Housing MaterialStainless SteelStainless Steel 
SealingHermeticHermetic 
Electrical Connector10-32 Coaxial Jack10-32 Coaxial Jack 
Electrical Connection PositionSideSide 
Mounting Thread10-32 FemaleNo Metric Equivalent 

All specifications are at room temperature unless otherwise specified.


CE

Product Notes
[1] Typical.
[2] Calculated from discharge time constant.
[3] Estimated using rigid body dynamics calculations.
[4] See PCB Declaration of Conformance PS023 for details.
Accessories:
Supplied
081A05Mounting stud, 10-32 to 10-32 x 0.27" long, BeCu (H900), no shoulder(1)
084A38Thermal boot (for Series 209)(1)
Optional Versions:
(M) Metric Mount
 ENGLISHSI
Accessories:
    M081A05Mounting Stud 10-32 to M6 x 0.75 x 0.27" long BeCu (H900), no shoulder(1)
(N) Negative Output Polarity
 ENGLISHSI
(W) Water Resistant Cable
 ENGLISHSI
    Electrical ConnectorSealed Cable
    Electrical Connection PositionSide
Product Documents
Additional Downloads