Log In

Log In

Need an Account? Start Here

 
208C03 - Platinum Stock Products; Multi-purpose, ICP® force sensor, 500 lb comp., 500 lb tension, 10 mV/lb
Click to zoom

Model: 208C03

$415.00 USD
(Pricing valid in US only)


Platinum Stock Products; Multi-purpose, ICP® force sensor, 500 lb comp., 500 lb tension, 10 mV/lb

  • Measurement Range: 500 lb (2.224 kN)
  • Sensitivity: (±15%) 10 mV/lb (2248 mV/kN)
  • Low Frequency Response: (-5%) 0.0003 Hz
  • Upper Frequency Limit: 36000 Hz
  • Temperature Range: -65 to +250 °F (-54 to +121 °C)

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Sensitivity (±15 %)10 mV/lb2248 mV/kN 
Measurement Range (Compression)500 lb2.224 kN 
Measurement Range (Tension)500 lb2.224 kN 
Maximum Static Force (Compression)3000 lb13.5 kN 
Maximum Static Force (Tension)500 lb2.224 kN 
Broadband Resolution (1 to 10000 Hz)0.005 lb-rms0.02 N-rms[1] 
Low Frequency Response (-5 %)0.0003 Hz0.0003 Hz[3] 
Upper Frequency Limit36000 Hz36000 Hz[4] 
Non-Linearity≤1 % FS≤1 % FS[2] 
Environmental
Temperature Range-65 to +250 °F-54 to +121 °C 
Temperature Coefficient of Sensitivity≤0.05 %/°F≤0.09 %/°C 
Electrical
Discharge Time Constant (at room temp)≥2000 sec≥2000 sec 
Excitation Voltage20 to 30 VDC20 to 30 VDC 
Constant Current Excitation2 to 20 mA2 to 20 mA 
Output Impedance≤100 Ohm≤100 Ohm 
Output Bias Voltage8 to 14 VDC8 to 14 VDC 
Spectral Noise (1 Hz)0.000211 lb/√Hz0.000942 N/√Hz[1] 
Spectral Noise (10 Hz)0.000109 lb/√Hz0.000488 N√Hz[1] 
Spectral Noise (100 Hz)0.0000387 lb/√Hz0.000173 N/√Hz[1] 
Spectral Noise (1000 Hz)0.00000863 lb/√Hz0.0000385 N/√Hz[1] 
Output Polarity (Compression)PositivePositive 
Physical
Stiffness6 lb/µin1.05 kN/µm[1] 
Size - Hex0.625 in15.88 mm 
Size - Height0.625 in15.88 mm 
Size - Sensing Surface0.500 in12.7 mm 
Weight0.80 oz22.7 gm 
Housing MaterialStainless SteelStainless Steel 
SealingHermeticHermetic 
Electrical Connector10-32 Coaxial Jack10-32 Coaxial Jack 
Electrical Connection PositionSideSide 
Mounting Thread10-32 Female10-32 Female 

All specifications are at room temperature unless otherwise specified.


CE

Product Notes
[1] Typical.
[2] Zero-based, least-squares, straight line method.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[5] See PCB Declaration of Conformance PS023 for details.
Accessories:
Supplied
080A81Thread Locker(1)
081B05Mounting Stud (10-32 to 10-32)(2)
084A03Impact Cap(1)
M081A62Mounting stud, 10-32 to M6 x 1, BeCu with shoulder(2)
Optional Versions:
(N) Negative Output Polarity
 ENGLISHSI
(W) Water Resistant Cable
 ENGLISHSI
    Electrical Connection PositionSide
    Electrical ConnectorSealed Cable
Product Documents
Additional Downloads