Log In

Log In

Need an Account? Start Here

 
208C02 - Platinum Stock Products; Multi-purpose, ICP® force sensor, 100 lb comp., 100 lb tension, 50 mV/lb
Click to zoom

Model: 208C02

$415.00 USD
(Pricing valid in US only)


Platinum Stock Products; Multi-purpose, ICP® force sensor, 100 lb comp., 100 lb tension, 50 mV/lb

  • Measurement Range: 100 lb (0.4448 kN)
  • Sensitivity: (±15%) 50 mV/lb (11241 mV/kN)
  • Low Frequency Response: (-5%) 0.001 Hz
  • Upper Frequency Limit: 36000 Hz
  • Temperature Range: -65 to +250 °F (-54 to +121 °C)

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Sensitivity (±15 %)50 mV/lb11241 mV/kN 
Measurement Range (Compression)100 lb0.4448 kN 
Measurement Range (Tension)100 lb0.4448 kN 
Maximum Static Force (Compression)600 lb2.669 kN 
Maximum Static Force (Tension)500 lb2.224 kN 
Broadband Resolution (1 to 10000 Hz)0.001 lb-rms0.004 N-rms[1] 
Low Frequency Response (-5 %)0.001 Hz0.001 Hz[3] 
Upper Frequency Limit36000 Hz36000 Hz[4] 
Non-Linearity≤1 % FS≤1 % FS[2] 
Environmental
Temperature Range-65 to +250 °F-54 to +121 °C 
Temperature Coefficient of Sensitivity≤0.05 %/°F≤0.09 %/°C 
Electrical
Discharge Time Constant (at room temp)≥500 sec≥500 sec 
Excitation Voltage20 to 30 VDC20 to 30 VDC 
Constant Current Excitation2 to 20 mA2 to 20 mA 
Output Impedance≤100 Ohm≤100 Ohm 
Output Bias Voltage8 to 14 VDC8 to 14 VDC 
Spectral Noise (1 Hz)0.000135 lb/√Hz0.000603 N/√Hz[1] 
Spectral Noise (10 Hz)0.0000276 lb/√Hz0.000123 N√Hz[1] 
Spectral Noise (100 Hz)0.00000956 lb/√Hz0.0000427 N/√Hz[1] 
Spectral Noise (1000 Hz)0.00000212 lb/√Hz0.00000946 N/√Hz[1] 
Output Polarity (Compression)PositivePositive 
Physical
Stiffness6 lb/µin1.05 kN/µm[1] 
Size - Hex0.625 in15.88 mm 
Size - Height0.625 in15.88 mm 
Size - Sensing Surface0.500 in12.7 mm 
Weight0.80 oz22.7 gm 
Housing MaterialStainless SteelStainless Steel 
SealingHermeticHermetic 
Electrical Connector10-32 Coaxial Jack10-32 Coaxial Jack 
Electrical Connection PositionSideSide 
Mounting Thread10-32 Female10-32 Female 

All specifications are at room temperature unless otherwise specified.


CE

Product Notes
[1] Typical.
[2] Zero-based, least-squares, straight line method.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[5] See PCB Declaration of Conformance PS023 for details.
Accessories:
Supplied
080A81Thread Locker(1)
081B05Mounting Stud (10-32 to 10-32)(2)
084A03Impact Cap(1)
M081A62Mounting stud, 10-32 to M6 x 1, BeCu with shoulder(2)
Optional Versions:
(N) Negative Output Polarity
 ENGLISHSI
(TLD) TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4
 ENGLISHSI
    Output Bias Voltage8 to 15 VDC
(W) Water Resistant Cable
 ENGLISHSI
Product Documents
Additional Downloads