Log In

Log In

Need an Account? Start Here


Model: 206C

$1,400.00 USD
(Pricing valid in US only)

ICP® quartz force ring, 80k lb comp., 0.06 mV/lb

  • Measurement Range: 80000 lb (355.86 kN)
  • Sensitivity: (±15%) 0.06 mV/lb (13.5 mV/kN)
  • Low Frequency Response: (-5%) 0.0003 Hz
  • Upper Frequency Limit: 40000 Hz
  • Temperature Range: -65 to +250 °F (-54 to +121 °C)

Add this product to my product comparison
Compare selected models ()

Sensitivity (±15 %)0.06 mV/lb13.5 mV/kN 
Measurement Range (Compression)80000 lb355.86 kN 
Maximum Static Force (Compression)90000 lb400.34 kN 
Broadband Resolution (1 to 10000 Hz)1.8 lb-rms8.0 N-rms[1] 
Low Frequency Response (-5 %)0.0003 Hz0.0003 Hz[3] 
Upper Frequency Limit40000 Hz40000 Hz[4] 
Non-Linearity≤1 % FS≤1 % FS[2] 
Temperature Range-65 to +250 °F-54 to +121 °C 
Temperature Coefficient of Sensitivity≤0.11 %/°F≤0.198 %/°C 
Discharge Time Constant (at room temp)≥2000 sec≥2000 sec 
Excitation Voltage20 to 30 VDC20 to 30 VDC 
Constant Current Excitation2 to 20 mA2 to 20 mA 
Output Impedance≤100 Ohm≤100 Ohm 
Output Bias Voltage8 to 14 VDC8 to 14 VDC 
Spectral Noise (1 Hz)0.16 lb/√Hz0.71 N/√Hz[1] 
Spectral Noise (10 Hz)0.050 lb/√Hz0.22 N√Hz[1] 
Spectral Noise (100 Hz)0.014 lb/√Hz0.0625 N/√Hz[1] 
Spectral Noise (1000 Hz)0.0036 lb/√Hz0.0160 N/√Hz[1] 
Output Polarity (Compression)PositivePositive 
Preload16000 lb71.172 kN 
Stiffness74 lb/µin13 kN/µm[1] 
Size - Diameter2.05 in52.1 mm 
Size - Height0.590 in15 mm 
Size - Bolt Diameter1 in24 mm 
Size - ID (Hole Diameter)1.025 in26 mm 
Size - OD (Sensor)2.05 in52 mm 
Size - Sensing Surface1.750 in44.4 mm 
Weight5.5 oz155 gm 
Housing MaterialStainless SteelStainless Steel 
Electrical Connector10-32 Coaxial Jack10-32 Coaxial Jack 
Electrical Connection PositionSideSide 

All specifications are at room temperature unless otherwise specified.


Product Notes
[1] Typical.
[2] Zero-based, least-squares, straight line method.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[5] See PCB Declaration of Conformance PS023 for details.
080A82Assembly Lubricant(1)
081A16Mounting Stud, 7/8-14 x 1.900, BeCu(1)
082B06Anti-Friction Washer(1)
083B06Pilot bushing (for Models 206C and 216B)(1)
Optional Versions:
(M) Metric Mount
    M081A16Mounting Stud, M22 x 2.00 x 1.900, BeCu(1)
    M083B06Pilot Bushing(1)
(N) Negative Output Polarity
(W) Water Resistant Cable
    Electrical ConnectorSealed Cable
    Electrical Connection PositionSide
Product Documents
Additional Downloads