icp® quartz force ring, 10 lb comp., 500 mv/lb

Force Sensor, ICP®

Model 201B01

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock Lead Times
3 Lead Time for 1-3 is 5 Wks.
  • CE
  • IP

ICP® quartz force ring, 10 lb comp., 500 mV/lb

  • Measurement Range: 10 lb (0.0445 kN)
  • Sensitivity: (±15%)500 mV/lb (112405 mV/kN)
  • Low Frequency Response: (-5%)0.01 Hz
  • Upper Frequency Limit: 90000 Hz
  • Temperature Range: -65 to +250 °F (-54 to +121 °C)

Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[2] Typical.
[5] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±15 %) 500 mV/lb 112405 mV/kN
Measurement Range (Compression) 10 lb 0.0445 kN
Maximum Static Force (Compression) 60 lb 0.267 kN
Broadband Resolution (1) 0.0002 lb-rms 0.0008896 N-rms [2]
Low Frequency Response (-5 %) 0.01 Hz 0.01 Hz [3]
Upper Frequency Limit 90000 Hz 90000 Hz [4]
Non-Linearity ≤1 % FS ≤1 % FS [1]
Environmental
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Coefficient of Sensitivity ≤0.03 %/°F ≤0.054 %/°C
Electrical
Discharge Time Constant (at room temp) ≥50 sec ≥50 sec
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤100 Ohm ≤100 Ohm
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
Output Polarity (Compression) Positive Positive
Physical
Preload 60 lb 0.267 kN
Stiffness 12 lb/µin 2.1 kN/µm [2]
Size - Diameter 0.650 in 16.5 mm
Size - Height 0.310 in 7.9 mm
Size - Bolt Diameter 0.25 in 6 mm
Size - ID (Hole Diameter) 0.251 in 6.38 mm
Size - OD (Sensor) 0.650 in 16.51 mm
Size - Sensing Surface 0.50 in 12.7 mm
Weight 0.35 oz 10 gm
Housing Material Stainless Steel Stainless Steel
Sealing Hermetic Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Electrical Connection Position Side Side

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
080A82 Assembly lubricant (for Series 201-207 force rings) 1
081A11 Mounting stud, 10-32 x 0.730", BeCu for Models 201B01, 201B02, 201B03, 201B04, 201B05, 211B & 201B76 1
082B01 Anti-friction washer for Models 201B01, 201B02, 201B03, 201B04, 201B05 & 211B 1
083B01 Pilot bushing for Models 201B01, 201B02, 201B03, 201B04, 201B05 & 211B 1
M081A11 Mounting stud, M5x0.8 x 0.730", BeCu for Models 201B01, 201B02, 201B03, 201B04, 201B05, 211B & 201B76 1
M083B01 Pilot bushing for Models 201B01, 201B02, 201B03, 201B04, 201B05 & 211B 1

Optional Versions


(W) Water Resistant Cable

English SI
Electrical Connector Sealed Cable
Electrical Connection Position Side

Build Out Your Measurement Chain


410C01
Model: 410C01

ICP® sensor signal cond., 35mm DIN-rail ...

$902.00 USD

(Pricing valid only in the U.S.)

002C10
Model: 002C10

General purpose coaxial cable, white FEP...

$57.00 USD

(Pricing valid only in the U.S.)

081A11
Model: 081A11

Mounting stud, 10-32 x 0.730", BeCu for ...

$29.00 USD

(Pricing valid only in the U.S.)

M081A11
Model: M081A11

Mounting stud, M5x0.8 x 0.730", BeCu for...

$29.00 USD

(Pricing valid only in the U.S.)

082B01
Model: 082B01

Anti-friction washer for Models 201B01, ...

$20.00 USD

(Pricing valid only in the U.S.)

083B01
Model: 083B01

Pilot bushing for Models 201B01, 201B02,...

$31.00 USD

(Pricing valid only in the U.S.)

221B01
Model: 221B01

Link ICP® quartz force sensor, 10 lb com...

$1,640.00 USD

(Pricing valid only in the U.S.)

M221B01
Model: M221B01

Link ICP® quartz force sensor, 10 lb com...

$1,640.00 USD

(Pricing valid only in the U.S.)

M083B01
Model: M083B01

Pilot bushing for Models 201B01, 201B02,...

$31.00 USD

(Pricing valid only in the U.S.)