Log In

Log In

Need an Account? Start Here

 

Model: 200C20

Add to Cart for Quote

ICP® quartz force sensor, impact, 20k lb comp., 0.25 mV/lb, 10-32 ele. conn., stainless steel construction, hermetically sealed.

  • Measurement Range: 20000 lb (88.96 kN)
  • Sensitivity: (±15%) 0.25 mV/lb (56.2 mV/kN)
  • Low Frequency Response: (-5%) 0.0003 Hz
  • Upper Frequency Limit: 40000 Hz
  • Temperature Range: -65 to +250 °F (-54 to +121 °C)
  • Mounting Thread: 1/4-28 Female (Not Applicable)

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Sensitivity (±15 %)0.25 mV/lb56.2 mV/kN 
Measurement Range (Compression)20000 lb88.96 kN 
Maximum Static Force (Compression)30000 lb133.44 kN 
Broadband Resolution (1 to 10000 Hz)0.30 lb-rms1.3 N-rms[2] 
Low Frequency Response (-5 %)0.0003 Hz0.0003 Hz[3] 
Upper Frequency Limit40000 Hz40000 Hz[4] 
Non-Linearity≤1 % FS≤1 % FS[1] 
Environmental
Temperature Range-65 to +250 °F-54 to +121 °C 
Temperature Coefficient of Sensitivity≤0.08 %/°F≤0.144 %/°C 
Electrical
Discharge Time Constant (at room temp)≥2000 sec≥2000 sec 
Excitation Voltage20 to 30 VDC20 to 30 VDC[5] 
Constant Current Excitation2 to 20 mA2 to 20 mA 
Output Impedance≤100 Ohm≤100 Ohm 
Output Bias Voltage8 to 14 VDC8 to 14 VDC 
Spectral Noise (1 Hz)0.039 lb/√Hz0.17 N/√Hz[2] 
Spectral Noise (10 Hz)0.012 lb/√Hz0.054 N√Hz[2] 
Spectral Noise (100 Hz)0.0034 lb/√Hz0.015 N/√Hz[2] 
Spectral Noise (1000 Hz)0.00088 lb/√Hz0.0039 N/√Hz[2] 
Output Polarity (Compression)PositivePositive 
Physical
Stiffness63 lb/µin11 kN/µm[2] 
Size - Diameter1.5 in38.1 mm 
Size - Height0.5 in12.7 mm 
Weight3.1 oz88 gm 
Housing MaterialStainless SteelStainless Steel 
SealingHermeticHermetic 
Electrical Connector10-32 Coaxial Jack10-32 Coaxial Jack 
Electrical Connection PositionSideSide 
Mounting Thread1/4-28 FemaleNot Applicable 

All specifications are at room temperature unless otherwise specified.


CE

Product Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[5] Minimum 25 VDC required for maximum output voltage.
[6] See PCB Declaration of Conformance PS023 for details.
Accessories:
Supplied
080A81Thread Locker(1)
081A06Mounting stud, 1/4-28 to 1/4-28 x .37 in. long, BeCu, no shoulder(1)
081B20Mounting Stud, with shoulder (1/4-28 to 1/4-28)(1)
084B23Impact cap, convex (for Model 200C20)(1)
M081A61Mounting Stud 1/4-28 to M6 X 1(1)
Optional Versions:
(N) Negative Output Polarity
 ENGLISHSI
(W) Water Resistant Cable
 ENGLISHSI
    Electrical ConnectorSealed Cable
    Electrical Connection PositionSide
Product Documents
Additional Downloads