Log In

Log In

Need an Account? Start Here

 

Model: 1408-02ADB

Add to Cart for Quote

Dual bridge load cell, fatigue rated low profile, 50k lb FS, 1.75-12 (F) thd, PT conn.

Specifically designed for airframe structural, lifetime and fatigue testing applications on wings, fuselage, landing gear, iron bird and other airframe components. •Series 1400 includes a dual output feature that offers sensor redundancy and the ability to provide control feedback from one output while the other is used for data acquisition •A2LA accredited calibration to ISO 17025 in both tension and compression directions •Fatigue rated load cells are guaranteed for 100 million fully-reversed cycles •Thermally compensated •Moment compensated •A single shunt calibration resistor is provided with each load cell for ease of calibration at the test site

  • Measurement Range: 50 klb (222 kN)
  • Size - Diameter: 8.00 in (203.20 mm)
  • Size - Height: 4.50 in (114.30 mm)
  • Electrical Connector: PT02E-10-6P (2)

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Measurement Range (100 x 10^6 cycles)50 klb222 kN[1][2] 
Sensitivity (±10 %)2.0 mV/V2.0 mV/V[3][4] 
Non-Linearity≤0.05 % FS≤0.05 % FS 
Hysteresis≤0.05 % FS≤0.05 % FS 
Non-Repeatability≤0.02 %RO≤0.02 %RO 
Eccentric Load Sensitivity0.1 %/in0.1 %/25.4mm 
Resonant Frequency18 kHz18 kHz 
Side Load Sensitivity0.1 %/in0.1 %/25.4mm 
Creep (in 20 minutes)0.025 %0.025 % 
Static Error Band≤0.05 % FS≤0.05 % FS[2] 
Environmental
Overload Limit150 klb667 kN 
Load Limit (Side Force, FX or FY)50 klb222 kN[6] 
Load Limit (Bending Moment, MX or MY)50k in-lb5649 Nm[6] 
Load Limit (Axial Torque, MZ)50k in-lb5649 Nm[6] 
Temperature Range (Operating)-65 to +200 °F-54 to +93 °C 
Temperature Range (Compensated)+15 to +115 °F-9 to +46 °C 
Temperature Effect on Output (Maximum)±0.0008 %Reading/°F±0.0018 %Reading/°C[5] 
Temperature Effect on Zero Balance (Maximum)±0.0008 %FS/°F±0.0018 %FS/°C[5] 
Electrical
Bridge Resistance350 Ohm350 Ohm[3] 
Excitation Voltage (Recommended)10 VDC10 VDC[7] 
Insulation Resistance>5k GOhm>5k GOhm 
Zero Balance≤1 %RO≤1 %RO 
Output Polarity+Tension +Tension  
Physical
Size - Height4.50 in114.30 mm[8] 
Size - Diameter8.00 in203.20 mm[8] 
Weight54 lb25.5 kg 
Mounting Thread1 3/4 - 12 UNF-3BNo Metric Equivalent 
Sensing ElementStrain GageStrain Gage 
Mounting Torque2600 in-lb294 Nm 
Deflection at Full Scale Capacity0.001 in0.025 mm 
Electrical ConnectorPT02E-10-6P (2)PT02E-10-6P (2) 

All specifications are at room temperature unless otherwise specified.



Product Notes
[1] Calibrated in tension and compression.
[2] FS - Full Scale.
[3] Nominal.
[4] RO - Rated Output.
[5] Over compensated operating temperature range.
[6] Singularly applied, i.e. no other extraneous loads.
[7] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[8] See Outline Drawing 49042 for Complete Dimensions
Accessories:
Optional
084A87Pre-Tension Stud(1)
181-012APT06A-10-6S(SR)(1)
8311-01-10ACABLE(1)
Optional Versions:
No optional versions
Product Documents
Additional Downloads