Log In

Log In

Need an Account? Start Here


Model: 1404-12A_LCS-2B

Add to Cart for Quote

PCB L&T fatique rated load cell low profile, 12.5 klbf rated capacity, 300% overload protection, 2.0 mv/v output, 1 1/4-12 UNF-2B thread PT20E-10-6P connector. Calibrated as a system.

  • Measurement Range: 12.5 klbf (56 kN)
  • Size - Diameter: 6.06 in (153.9 mm)
  • Size - Height: 3.50 in (88.9 mm)
  • Electrical Connector: PT02E-10-6P

Add this product to my product comparison
Compare selected models ()

Measurement Range (100 x 10^6 cycles)12.5 klbf56 kN[1][2] 
Sensitivity (±10 %) (RO)2.0 mV/V2.0 mV/V[5][4] 
Non-Linearity≤0.05 % FS≤0.05 % FS[2][3] 
Hysteresis≤0.05 % FS≤0.05 % FS[2][3] 
Non-Repeatability≤0.01 %RO≤0.01 %RO[3][4] 
Eccentric Load Sensitivity0.1 %/in0.1 %/25.4mm[3] 
Resonant Frequency8 kHz8 kHz 
Side Load Sensitivity0.1 %/in0.1 %/25.4mm[3] 
Creep (in 20 minutes)0.025 %0.025 %[3] 
Static Error Band≤0.05 % FS≤0.05 % FS[2][3] 
Overload Limit37.5 klbf166 kN 
Load Limit (Side Force, FX or FY)25 klbf111 kN[7] 
Load Limit (Bending Moment, MX or MY)25 klbf-in2825 Nm[7] 
Load Limit (Axial Torque, MZ)25 klbf-in2825 Nm[7] 
Temperature Range (Operating)-65 to +200 °F-54 to +93 °C 
Temperature Range (Compensated)+15 to +115 °F-9 to +46 °C 
Temperature Effect on Output (Maximum)±0.0008 %Reading/°F±0.0018 %Reading/°C[6] 
Temperature Effect on Zero Balance (Maximum)±0.0008 %FS/°F±0.0018 %FS/°C[6] 
Bridge Resistance350 Ohm350 Ohm[5] 
Excitation Voltage (Recommended)10 VDC10 VDC[8] 
Insulation Resistance>5K GOhm>5K GOhm 
Zero Balance±1 %RO±1 % FS[4] 
Output Polarity+Tension +Tension  
Size - Height3.50 in88.9 mm[9] 
Size - Diameter6.06 in153.9 mm[9] 
Weight21 lb9.53 kg 
Mounting Thread1 1/4 - 12 UNF-3BNo Metric Equivalent 
Housing MaterialPainted SteelPainted Steel 
Sensing ElementStrain GageStrain Gage 
Mounting Torque1400 lbf-in158 Nm 
Deflection at Full Scale Capacity0.001 in0.025 mm 
Electrical ConnectorPT02E-10-6PPT02E-10-6P[10] 

All specifications are at room temperature unless otherwise specified.

Product Notes
[1] Calibrated in tension and compression.
[2] FS - Full Scale.
[3] Performance specifications guaranteed with factory installed optional Tension Base 084A101
[4] RO - Rated Output.
[5] Nominal.
[6] Over compensated operating temperature range.
[7] Singularly applied, i.e. no other extraneous loads.
[8] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[9] See Outline Drawing 49932 for Complete Dimensions
[10] See "Optional Versions" for other connectors available
084A101TENSION LOAD BASE W/ 1.25-12 THD.(1)
084A56Pre-Tension Stud(1)
084A90Connector Shroud(1)
Optional Versions:
No optional versions
Product Documents
Additional Downloads