Log In

Log In

Need an Account? Start Here


Model: 1380-02A

$858.50 USD
(Pricing valid in US only)

PCB L&T Rod End Load Cell, 1,000 lbf (4.4 kN) rated capacity, 50% static overload protection, 3/4-16 male & female thread, aluminum construction

  • Measurement Range: 1000 lbf (4448 N)
  • Size - Diameter: 1.50 in (38.1 mm)
  • Size - Height: 4.25 in (107.9 mm)
  • Electrical Connector: PT02E-10-6P

Add this product to my product comparison
Compare selected models ()

Measurement Range1000 lbf4448 N[1] 
Sensitivity (±10 %)2 mV/V2 mV/V[2] 
Non-Linearity≤0.25 % FS≤0.25 % FS 
Hysteresis≤0.15 % FS≤0.15 % FS 
Non-Repeatability≤0.05 %RO≤0.05 %RO 
Resonant Frequency10 kHz10 kHz 
Overload Limit1500 lbf6672 N 
Load Limit (Side Force, FX or FY)250 lbf1112 N[3] 
Load Limit (Bending Moment, MX or MY)750 inf-lb85 Nm[3] 
Load Limit (Axial Torque, MZ)650 inf-lb73 Nm[3] 
Temperature Range (Operating)-20 to +200 °F-28 to +93 °C 
Temperature Range (Compensated)+70 to +170 °F+21 to +77 °C 
Temperature Effect on Output (Maximum)±0.01 %Reading/°F±0.018 %Reading/°C[4] 
Temperature Effect on Zero Balance (Maximum)±0.005 %FS/°F±0.009 %FS/°C[4] 
Bridge Resistance350 Ohm350 Ohm[5] 
Excitation Voltage (Recommended)10 VDC10 VDC[6] 
Insulation Resistance>5000000000 Ohm>5000000000 Ohm 
Zero Balance≤1 % FS≤1 % FS 
Output PolarityPositi√e Positi√e  
Output Polarity+Tension +Tension  
Size - Height4.25 in107.9 mm[7] 
Size - Diameter1.50 in38.1 mm[7] 
Weight0.5 lb227 g 
Mounting Thread3/4 - 16 MaleNo Metric Equivalent 
Mounting Thread3/4 - 16 FemaleNo Metric Equivalent 
Cover MaterialAnodized AluminumAnodized Aluminum 
Sensor MaterialAnodized AluminumAnodized Aluminum 
Sensing ElementStrain GageStrain Gage 
Deflection at Full Scale Capacity0.0006 in0.015 mm 
Electrical ConnectorPT02E-10-6PPT02E-10-6P 

All specifications are at room temperature unless otherwise specified.

Product Notes
[1] FS - Full Scale.
[2] RO - Rated Output.
[3] Singularly applied, i.e. no other extraneous loads.
[4] Over compensated operating temperature range.
[5] Nominal.
[6] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[7] See Outline Drawing 45488 for complete dimensions.
Optional Versions:
No optional versions
Product Documents
Additional Downloads