icp® microphone, 5000 mv/psi, resolution 0.00002 psi (+77 db), accel. comp.

ICP® Pressure Sensor

Model 106B52

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
2 Call for Lead Time
  • CE
  • IP

ICP® microphone, 5000 mV/psi, resolution 0.00002 psi (+77 dB), accel. comp.

  • Measurement Range: 1 psi (6.89 kPa)
  • Sensitivity: (±15%)5000 mV/psi (725 mV/kPa)
  • Low Frequency Response: (-5%)2.5 Hz
  • Resonant Frequency: >=40 kHz (>=40 kHz)
  • Electrical Connector: 10-32 Coaxial Jack
  • Weight: 1.2 oz (35 gm)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Measurement Range (for ±5V output) 1 psi 6.89 kPa
Sensitivity (±15 %) 5000 mV/psi 725 mV/kPa
Maximum Pressure (Dynamic) 10 psi 68.9 kPa
Maximum Pressure (static) 50 psi 345 kPa
Resolution 0.00002 psi .00013 kPa
Resonant Frequency ≥40 kHz ≥40 kHz
Rise Time (Reflected) ≤12.5 µ sec ≤12.5 µ sec
Low Frequency Response (-5 %) 2.5 Hz 2.5 Hz
Non-Linearity ≤1 % FS ≤1 % FS [1]
Environmental
Acceleration Sensitivity ≤0.002 psi/g ≤0.0014 kPa/(m/s²)
Temperature Range (Operating) -65 to +250 °F -54 to +121 °C
Temperature Coefficient of Sensitivity ≤0.03 %/°F ≤0.054 %/°C
Maximum Shock 1000 g pk 9807 m/s² pk
Electrical
Output Polarity (Positive Pressure) Positive Positive
Discharge Time Constant (at room temp) ≥0.2 sec ≥0.2 sec
Excitation Voltage 24 to 27 VDC 24 to 27 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance <100 Ohm <100 Ohm
Output Bias Voltage 7 to 14 VDC 7 to 14 VDC
Physical
Sensing Geometry Compression Compression
Sensing Element Quartz Quartz
Housing Material 17-4 Stainless Steel 17-4 Stainless Steel
Diaphragm 316L Stainless Steel 316L Stainless Steel
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Weight 1.2 oz 35 gm

* All specifications are at room temperature unless otherwise specified.

Accessories
Supplied
060A11 Acetal clamp nut, 3/4-16-2A thd, 3/4" hex (for Model 106B50) 1
060A13 Metric Acetal clamp nut, M20 x 1.5-6G thd, 20 mm hex (for Model M106B50) 1
065A36 Seal, 0.687" OD x 0.625" ID x 0.060" thk, Acetal (for Model 106B5X) 3

Optional Versions

(E) Emralon coating

English SI
Electrical Isolation 100000000 Ohm
Coating Emralon
(W) Water Resistant Cable
Accessories:
Supplied 060A11 Acetal clamp nut 3/4-16-2A thd 3/4" hex 1
(WM) Water Resistant Cable
Accessories:
Supplied 060A13 Metric Acetal clamp nut M20 x 1.5-6g thd 20 mm hex 1

Build Out Your Measurement Chain